Reply With QuoteIts the same as a 4 speed early Rangie. A good synthetic oil is best. I'm pretty sure the transfer is 90 oil though.
AT REST
The manual (Stage 1 V8 SIII) says engine oil, is this the best or is there a preferred oil that does a better job, Synthetic maybe, appreciate any tips, Regards Frank.
TopicToaster
Its the same as a 4 speed early Rangie. A good synthetic oil is best. I'm pretty sure the transfer is 90 oil though.
Master
SubscriberI was looking at the same thing yesterday for my Rangie. Found this thread;
Oil Recommendation for LT95 4 speed box and Isuzu 4bd1
I decided to go with VMX80
AT REST
VMX80, is that a brand name or the specific name of that type of oil, if so what manufacturer makes it, Castrol, Shell, etc., Regards Frank.Originally Posted by djames
ChatterBox
Castrol VMX 80 I personally found it too light for my LT95 although it did give the best gear changes when cold.
I found Mobil 1 the best
Swaggie
Hi Frank,
I'm using just a good quality (Pennzoil) longlife MA 15w40 engine oil in my main box and transfer. I change it with every engine oil change, (Coz I can) and so far it comes out clean andd the filters etc are spotless. I agonised over this when I bought the 'new' box, and after talking with Dave 'blackus knightus' I'm going with the ADF specs, which say (castrol) 15w40 engine oil in both.
So far so good, even with a recent towing trip to QLD and back, the oil was spotless etc when I got home in both boxes. I'm also running a transfer case temp gauge, and with the 15w40 oil and the taper roller bearings, it never got above 60deg.
I DID have a 3rd to 4th selection problem once while I was away, and it has now 'fixed' itself.So I am not bovvered.
JC
The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈
RoverLord
engine oil, same as you put in the engine for the climate your in
ditto for the tcase...
why
cause the EMEI's say so.
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
Master
SubscriberI agree the VMX80 could be bit light - but given that the gearbox and TC appeared to have not been changed in long time- the gearbox oil was predominantly dark grey, the TC was almost black and both had a very high percentage of sludge, I will probably be changing oil again soon to flush the residual rubbish through. I will look at a heavier oil then.
OldBushie
^^^^^^^^^^that
ForumSage
Hi,
Had an LT95 for years. I remember the oil question from several posts on various fora.
Apparently you must NOT use EP 90 in the TC because it has an additive that eats the brass shims in stock 95's. For the same reason you should not use either GL4 or GL5 oils because one of these has the same additive. (I can't recall which one).
I just use engine oil with some Lucas...... Morey's additive and change it regularly every blue moon.
PhilipA had the answers from memory.
cheers, DL
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks