Milford Cargo Barrier D1 Fitting Instructions Anyone?

**cockie55** · 14th August 2008, 09:06 PM

It seems Milford Cargo Barrier Disco 1 (changeover) fitting instructions are like rockinghorse doodo. Anyone who can post or PM me these much appreciated.

**p38arover** · 14th August 2008, 09:36 PM

Milford emailed a copy to me. I did send it to Inc for inclusion in the Files section of this site.

In the meantime, here it is: http://p38arover.com/rover/discovery/706500.pdf

**cockie55** · 14th August 2008, 09:52 PM

EXCELLENT....Thank you very much for that Ron

**p38arover** · 14th August 2008, 10:00 PM

No worries, leave your money on the fridge,

**kitacooch** · 16th August 2008, 08:25 PM

good luck with the fitting is all a can say. If you are using second hand then probably don't have all the bracketing as it is generally too hard for the seller to remove, i learnt that the hard way, the kits can be purchased online but bit rich.

**p38arover** · 16th August 2008, 08:28 PM

I bought the kit through TJM - $99.

Fitting it wasn't as bad as I'd been led to believe by the local TJM blokes.

**LRpete** · 17th August 2008, 05:38 PM

I also have purchased a second hand barrier from ebay and my refit kit is on its way. Yet to do the install.

However, can anyone tell me the exact length (distance between fixing holes) for the half metre extension brackets that are used on the top when mounting the barrier in the Forward position.

I dont have them and cant get them from Milford anytime soon because they only make up batches every now and then! So will have to get some made up at a metal shop for a trip im going on in two weeks time.

Pete

**kitacooch** · 17th August 2008, 07:57 PM

Originally Posted by LRpete

I also have purchased a second hand barrier from ebay and my refit kit is on its way. Yet to do the install.

However, can anyone tell me the exact length (distance between fixing holes) for the half metre extension brackets that are used on the top when mounting the barrier in the Forward position.

I dont have them and cant get them from Milford anytime soon because they only make up batches every now and then! So will have to get some made up at a metal shop for a trip im going on in two weeks time.

Pete

what do you mean by mount in the forward position?
i think i have the brackets you talking about, will have a look, if i decide i don't need them, i could do with a donation to go towards my mounting kit from TJM.

**p38arover** · 17th August 2008, 08:52 PM

Yeah, I'll measure mine in the morning. Actually, I may still have the ones I made for mine before I got the correct brackets. If I have got them I can post them to you

**LRpete** · 17th August 2008, 09:22 PM

Kitacooch

Sorry poor choice of words!

If you do decide you dont want the extension straps then let me know. I live in brisbane and could drop down to the Coast to pick them up together with a suitable contribution for used straps. If not I'll get my own made.

P38arover

Thanks for the offer but the measurement is probably all I need. Should be simple to cut and drill.

Thread: Milford Cargo Barrier D1 Fitting Instructions Anyone?

Thread Tools

Milford Cargo Barrier D1 Fitting Instructions Anyone?

Bookmarks

Bookmarks

Posting Permissions