Thread: hub seal

just wondering when fitting these do you push it onto the stub axel or is it better to put it in the back of the disc and if it goes in the disc does it just sit in flush with the back or down against the bearing

cheers guys

You put it in the back of the hub (the disc as you call it).

All the ones I've fitted to mine had a lip on the seal which sat in a bevelled edge on the hub which in turn made the back of the seal sit flush with the back of the hub. Only one leak from mine so far which was fixed by emery taping the stub axle seal surface. Had a bit of gunk/rust on it. All good now.