Results 1 to 10 of 10

Thread: HEEEELLLPPPP - engine wont turn over but battery OK

  1. 3rd October 2008, 05:56 PM #1
    simon.w Guest

    HEEEELLLPPPP - engine wont turn over but battery OK

    Hi all - any suggestions what this could be?

    turn the key and the TD5 wont turn over. Clean terminals and plenty of voltage at the battery, at the main terminals in the fuse/relay box, at the alternator, and at the starter motor - with very little drop when key is turned to start position.

    You can hear the solenoid kick in, so that is working. Every now and then it will turn over - so the starter motor is obviously not siezed.

    I have leaky fuel pressure regulator... with small amount of diesel running down towards starter.... so maybe this has caused an issue.

    Plus I was playing aorund with fuel reg last night, so maybe I bumped something.

    Any help greatly appreciated
    Reply With Quote Reply With Quote
  2. 3rd October 2008, 06:08 PM #2
    ssk
    ssk is offline Fossicker
    Join Date
    Mar 2008
    Location
    Melbourne
    Posts
    31
    Total Downloaded
    0
    Hi Simon...

    I've had starting problems as well and was given this link by Captain Rightfoot ...found the info really valuable...

    TD5 cutting out
    Reply With Quote Reply With Quote
  3. 3rd October 2008, 06:18 PM #3
    justinc's Avatar
    justinc
    justinc is offline Swaggie Vendor
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    Simon, Definately a solenoid contact issue. The contact set is almost identical to a Nippondenso Toyota Corona starter, thes are very common starter motors and ALL auto elecs have solenoid plungers and contacts for them on the shelf.

    It is an easy job.

    Give me a call on 0408 995 635 if you need me to talk you through it.

    Don't panic!

    JC
    The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
    The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈
    Reply With Quote Reply With Quote
  4. 3rd October 2008, 06:20 PM #4
    mike 90 RR Guest
    Just saw Justincs post

    Amended
    Reply With Quote Reply With Quote
  5. 3rd October 2008, 06:24 PM #5
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    my moneys on a dicey contact in the solenoid followed by a bad earth.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  6. 3rd October 2008, 10:02 PM #6
    simon.w Guest
    Hi all,

    well I am feeling pretty pleased with myself right about now... not only did I pull out and fix the faulty starter motor (... it just had some crap in it),

    I also did the change over on the fuel pressure regulator. Actually... I'm glad the starter **** itself today of all days.... at least the top nut was easier to get to with the fuel cooler, heater hoses and and regulator off.

    The only downside is that my hands and arms look like I have been juggling a couple of wild cats. I have a sneaky feeling that the Brits sharpen every little piece of metal and plastic that you have to squeeze your arms past just incase a German has to work on it one day.

    Thanks so much for your advice guys... really appreciate it.

    Have a great weekend.

    Simon
    Reply With Quote Reply With Quote
  7. 4th October 2008, 07:43 AM #7
    justinc's Avatar
    justinc
    justinc is offline Swaggie Vendor
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    Well done Simon,

    I get the sliced up arm look every week too

    Good work!

    JC
    The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
    The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈
    Reply With Quote Reply With Quote
  8. 4th October 2008, 08:30 AM #8
    Captain_Rightfoot's Avatar
    Captain_Rightfoot
    Captain_Rightfoot is offline ForumSage
    Join Date
    Jan 1970
    Location
    Brisbane
    Posts
    5,475
    Total Downloaded
    0
    I have a feeling that this happened to my car. LR just replaced the starter motor. I wasn't complaining!
     2005 Defender 110 
    Reply With Quote Reply With Quote
  9. 5th October 2008, 01:10 PM #9
    Tank's Avatar
    Tank
    Tank is offline AT REST
    Join Date
    Jan 1970
    Location
    Moruya Heads/Sth. Coast, NSW
    Posts
    6,532
    Total Downloaded
    0
    Quote Originally Posted by justinc View Post
    Well done Simon,

    I get the sliced up arm look every week too

    Good work!

    JC
    Most cuts are caused by Plastic wire ties, when the tail is trimmed, esp. with wire cutters it leaves a razor sharp stub sticking out to grab your flesh, I have scars from cuts to the bone on my hands and wrists from these buggers.
    Tip: cut the tails flush with a sharp knife or razor or if it is hard to get at, don't cut the tail off, but tuck it in out of the way and before the smarties come in and say be more vigilant, being black and mounted out of sight means you can't always see them, Regards Frank.
    Reply With Quote Reply With Quote
  10. 5th October 2008, 01:42 PM #10
    justinc's Avatar
    justinc
    justinc is offline Swaggie Vendor
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    Quote Originally Posted by Tank View Post
    Most cuts are caused by Plastic wire ties, when the tail is trimmed, esp. with wire cutters it leaves a razor sharp stub sticking out to grab your flesh, I have scars from cuts to the bone on my hands and wrists from these buggers.
    Tip: cut the tails flush with a sharp knife or razor or if it is hard to get at, don't cut the tail off, but tuck it in out of the way and before the smarties come in and say be more vigilant, being black and mounted out of sight means you can't always see them, Regards Frank.
    Thats true Frank, I've taken to not trimming at all, or as you say, tucking them out of the way a bit.
    (They hardly get infected etc either, as I use a lot of garlic when cooking, and crushing the cloves the trad way with a broad knife blade I get a fair bit of pain from garlic juices getting in to the cuts)
    JC
    The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
    The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈
    Reply With Quote Reply With Quote
« Another Td5 Headgasket blown.... | steer boxes »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!