What the?! Is that a 'kiwi' thing?! :D:DQuote:
Originally Posted by Dougal
Angus
Printable View
What the?! Is that a 'kiwi' thing?! :D:DQuote:
Originally Posted by Dougal
Angus
Went to Perth yesterday.
340ks and only reading the second notch:cool::cool::cool::cool::cool:It has only been getting 350ks to the 1/2 way mark.Goes like a train,overtaking roadtrains is much safer!!!!
McDisco,contact Stuart @ Rovercraft,(his username is Stuart on here)
Andrew
Cheers Andrew! Will do.
I actually just want to try a different MAF to see if it works. No point buying one if mine is fine...
Angus
Another trip to Perth yesterday,770ks out of the tank sofar and 2 notches before red light time.:cool::cool::cool::cool::cool:
Andrew
Andy
On your Nanocom, what was your MAF reading at idle? Prior to replacement?
I didnt check it,probably worth comparing the 2 sometime,as it could help others diagnose their problems.Economy/driveability returning will pay for the thing VERY quickly.
Will look into doing it during the week.
Andrew
I read somewhere that it should read 45kg/hr on idle and up to 300 under load. If it reads 0 or doesnt change then it might be stuffed.
I really should check mine for this then...
Angus
90lts of fuel 990km:cool::cool::cool::cool::cool::cool::cool::co ol: 600 to 650ks was all I was getting before.
Much nicer to drive.
The 2 Perth trips I had the cruise control on,without it I expect that I would get better economy still as the trip is quite hilly.
Andrew
Hey thats good! I get around 12l/100km, but you mustt be getting under 10!
Angus
Can they be cleaned?
I might have a look at mine in the morning.