Another spring question?

**long stroke** · 28th October 2008, 08:51 PM

Hi all

Just replaced the springs in my d1, and dad was wondering if my old rear springs (2"kings) would fit into the front of the county (isuzu) because we will be needing taller ones in the front due to a winch and bullbar going on soon

Any ideas welcome....

CHEERS TIM.

**Slunnie** · 28th October 2008, 09:43 PM

Yep. it'll probably be 3-4" lifted at the front though.

**long stroke** · 28th October 2008, 09:49 PM

Mmmmmmmm probably don't need that much, might just put them in one day and see what they look like

Thanks slunnie

CHEERS TIM.

**PAT303** · 28th October 2008, 10:54 PM

You just might find it sits slightly high but after a month or so levels out,mine did and I have a lighter donk. Pat

lokka · 29th October 2008, 07:40 AM

they should be ok at first but may sag quickly as the rate would be different as the front isuzu ones are fairly hefty to hold up the 380KG isuzu donk but the best thing to do is stick em in suck it and see as i say

**C H T** · 29th October 2008, 08:45 AM

Tim

I have just fitted Dobinson Springs pt number C51-015 fronts to my Isuzu engined Defender - rate just right height good. Put 35mm of packers under the back spring plates (standard defender rears) - vehicle sits level and rides very nicely. PM me and with a phone number if you want more info (I can supply a pattern for the packers).

Christopher

PS the Disco rears probably won't be succesful - I have tried going down that route!

Thread: Another spring question?

Thread Tools

Another spring question?

Bookmarks

Bookmarks

Posting Permissions