Results 1 to 4 of 4

Thread: Landrover conversion lHD to RHD

  1. 7th November 2008, 07:00 PM #1
    LR3 Dubai Guest

    Landrover conversion lHD to RHD

    Can anyone help. i live in Dubai and have a Landrover Discovery LR3 (discovery 3 Series) 2008 model. Its a Left Hand Drive and i want to bring it back to Australia. I need to know if it can be converted to a Right Hand Drive in Australia.
    Reply With Quote Reply With Quote
  2. 7th November 2008, 08:43 PM #2
    101RRS's Avatar
    101RRS
    101RRS is offline LordRover Supporter
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,616
    Total Downloaded
    0
    Anything can be done for a cost - compliancing will also be expensive - better to sell what you have and buy here.

    Garry
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon
    Reply With Quote Reply With Quote
  3. 7th November 2008, 08:54 PM #3
    PhilipA
    PhilipA is offline Swaggie Subscriber
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,152
    Total Downloaded
    0
    In Dubai my guess would be a petrol V8.
    These have terrible resale value in Australia at the moment so you could pick a good one up relatively cheaply( say $45K or so)
    Seeing labour is at least A$100 per hour in australia and probably more, I would seriously doubt that it would be economically feasible.
    Regard s Philip A
    Reply With Quote Reply With Quote
  4. 7th November 2008, 09:27 PM #4
    JDNSW's Avatar
    JDNSW
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,521
    Total Downloaded
    0
    As Garrycol says - on top of the problems of proving use and ownership overseas for two years, while anything is possible, you would need to have very deep pockets to even think about it.

    I would be surprised if it could be done for less than $10,000 and six months, and would not be surprised if both these figures doubled. It would involve a lot of labour, both in doing the work, and the research and paperwork, plus a lot of expensive parts, that would mostly be special orders as they are not usually needed.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
« Auto trannie noise | removal of the viscous fan?? d1 v8 »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!