Results 1 to 4 of 4

Thread: D2 Blinkers have died ?

  1. 14th November 2008, 11:40 AM #1
    discotek's Avatar
    discotek
    discotek is offline Fossicker
    Join Date
    May 2006
    Location
    Holland Park, Brisbane, QLD
    Posts
    72
    Total Downloaded
    0

    D2 Blinkers have died ?

    Hi All

    Have rewired in a set of LED rear blinkers for a custom bar project.

    These were working fine. I had to connect and disconnect a few times to fit up the bar. Blinkers still working ok.

    Now the blinkers are dead. Both blinkers and the hazard lights.

    (The temporary connectors may have shorted out)

    The new LED lights still run off a battery.
    The green indicator arrow lights on the dash board are working.
    The 15amp fuse under the bonnet is ok.
    The Nanocom BCU body settings show activity when the blinkers are switched on.
    There is no audible blinker sound.

    Any other clues on how to resolve this ?
    Last edited by discotek; 14th November 2008 at 11:59 AM. Reason: Typo
    D2 - 2001 - Auto - Lovin it
    Reply With Quote Reply With Quote
  2. 14th November 2008, 12:08 PM #2
    LandyAndy's Avatar
    LandyAndy
    LandyAndy is offline RoverLord Gold Subscriber
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    When I did my rear bar I wired the leds into the trailer connector,no problems with it.
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post
    Reply With Quote Reply With Quote
  3. 14th November 2008, 01:15 PM #3
    discotek's Avatar
    discotek
    discotek is offline Fossicker
    Join Date
    May 2006
    Location
    Holland Park, Brisbane, QLD
    Posts
    72
    Total Downloaded
    0
    Wiring into the trailer plug is the way to go, in retrospect. Saves snipping the loom at the rear bar light plug. But this was working fine for me for a week, until something shorted I reckon.

    I thought the indicators fuse under the bonnet would have captured that problem though.
    D2 - 2001 - Auto - Lovin it
    Reply With Quote Reply With Quote
  4. 14th November 2008, 04:19 PM #4
    discotek's Avatar
    discotek
    discotek is offline Fossicker
    Join Date
    May 2006
    Location
    Holland Park, Brisbane, QLD
    Posts
    72
    Total Downloaded
    0

    Problem Solved

    Turned out to be a fuse. Must have read the fuse diagram upside down.
    D2 - 2001 - Auto - Lovin it
    Reply With Quote Reply With Quote
« Park & tail lights dead | seting the timing on a d1 v8 »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!