Is the clutch system on the '96 v8i Discovery very hard and does it take low on the floor?How difficult is it to repair,cause I am properbly going to do it myself!!
depends on what you mean by hard, if its only disengaging low to the floor more than likely its a fluid problem double check the level and the bleed first, usually that will get it to come up again, if its not slipping you should be able to leave it alone.
if the hydraulics are all good then your looking at either a bending fork or a failing plate. either way its a pull apart job. my moneys on dropping the box.
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks