It is steel. LR decided to stop galvanising them for a period. They are galvanised again now.
If you want to remove them, from memory, you need to remove the roof and sides, then drill out the rivets that hold them on
Rgds
Pete
My 01 extreme has some rust in the "band" that sits between the tub and the rear wagon section (which sits on top of the tub and houses the sliding rear windows).Sorry, bad explanation....
The band has a sort of 1/4 moon shape to it and runs from the rear passenger doors to the back of the 110, stops at the back swingaway door.
It's about 30mm high.
Anyway....does anyone know if this strip is steel or aluminium?
I know the 110 is a mix of both but I thought this strip would be alluminium, the rust though sures makes it look like steel.
Then, how do I get at it to repair the rust?
From the inside out ??
Thanks in advance for any help.![]()
It is steel. LR decided to stop galvanising them for a period. They are galvanised again now.
If you want to remove them, from memory, you need to remove the roof and sides, then drill out the rivets that hold them on
Rgds
Pete
Thanks Pete,
Appreciate the help
Soundslike an easy job...I'll knock it off tonight....
Cheers
Geoff
Yep that should be plenty of time!!!!
Rgds
Pete
you mean these
http://www.aulro.com/afvb/90-110-130...ng-strips.html
Our Land Rover does not leak oil! it just marks its territory.......
Yep that's them all right....
Anyone know how the roof is attached, is it just bolted, any permanent/welded spots?
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks