Just saw the post regarding a cam for a 3.5 efi which got me thinkin.
Having just started a rebuild on a new motor for my county I also need advice/opinions/suggestions on cams.

Motor is a 3.9 v8 with 20 thou over pistons/bore.
Motor will be on dual fuel
Heads are 14 bolt 3.9 heads that have been done up to 4.6 spec( so i was told-will check-no port matching yet)
Electronic ignition
Four barrel manifold and quadrajet carby
discovery exhaust manifolds into a 2.5 inch system.
Lt 95 gearbox
Vehicle is a 84 county 235/85 tyres that will be towing a tralier around Oz in three months

I need a cam that will allow me to sit on 95-100 whilst towing.

With the gearing of the lt95 do i need the low down torque??

w