The drain is blocked. (obviously)
Get into it from the return air section (passengers feet)
Undo the four bolts/machine screws holding the metal grille in place and you will see that there are two drains out of the condensate tray running to a tee piece that then exists through the firewall.
Pop both hoses off and you'll probably have a flood on the floor, if not just gently poke something suitable up both drain spouts and blow through the drain hose.
In an ideal world you'd spray some coil cleaner on the evaporator and give it and the drains a clean, but it isn't that simple.....
BTW, AMC who designed and built the system no longer exist.


 
					
					 
				
				
				
					 Reply With Quote
  Reply With Quote 
						
					 
						
					
 Originally Posted by Panya
 Originally Posted by Panya
					
 
						
					
Bookmarks