egr valve`s for every1

I think its more important to grind away the webbing inbetween the ports,,,
http://www.aulro.com/afvb/technical-...ification.html

Quote:

---

Originally Posted by disco td5 x2

I got the inlet manifold off yesterday and i was very shocked how much crap was in side it and when i was washing it with the gerni i noticed there were in a couple of ports some flakes of ali blew off maybe something to watch out for if your cleaning it out the im unhappy at the fact i cant clean the head as i have cleaned everything else but hey i have striped enough off the front of the car i cant belive that car makers can make these cars with such big defects in them to have all that crap going in to yor cars engine i was also told to drill out the outer holes in the manifold if that helps any 1 cheers

---

On the exhaust manifold! NOT the intake!

cheers phil

there would b no point drilling the holes out on the inlet as it does not got hot enough for it 2 warp but thanks for that useless point

Quote:

---

Originally Posted by disco td5 x2

there would b no point drilling the holes out on the inlet as it does not got hot enough for it 2 warp but thanks for that useless point

---

Polite and helpful as ever......

Hey disco td5 x2,
Can I buy you 2 egr kits?
Send me your address and I'll walk to your place using dingo traps as shoes and hand deliver em.
It'll be less painful than reading these threads :D

x2 for me aswell for the rangie and SS :D

Quote:

---

Originally Posted by disco td5 x2

there would b no point drilling the holes out on the inlet as it does not got hot enough for it 2 warp but thanks for that useless point

---

Ever considered visiting LandyZone?

LandyZone - Land Rover Forum

I suspect it might be a forum more suited to you.

Cheers
Simon

I was going to suggest www.handbag.com ;)

Quote:

---

Originally Posted by disco td5 x2

there would b no point drilling the holes out on the inlet as it does not got hot enough for it 2 warp but thanks for that useless point

---

if you would actuall read your own post you half wit (yes that was a personal attack, sue me bitch) it reads as one sentance as there are no punctuation marks SO IT READS LIKE YOU ARE TALKING ABOUT THE F IN INLET!!!!.


here it is incase you missed it

Originally Posted by disco td5 x2 https://www.aulro.com/afvb/images/im...016/08/768.jpg
I got the inlet manifold off yesterday and i was very shocked at how much crap was in side it.... (and) When i was washing it with the gerni i noticed there were in a couple of ports some flakes of (ali) alloy blew off maybe something to watch out for if your cleaning it out.... (the) I'm unhappy at the fact i cant clean the head as i have cleaned everything else,,,, but hey i have striped enough off the front of the car and i cant belive that car makers can make these cars with such big defects in them to have all that crap going in to (yor)your cars engine i was also told to drill out the outer holes in the manifold (???inlet or exhaust???) if that helps any 1 cheers



CAN SOME ONE BAN THIS TOOL??????

cheers phil

CosmoGirl - The Ultimate Teen Site for Games, Beauty, Fashion, Horoscopes, Quizzes and More! :whistling: