Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Glycol % in coolant

  1. #1
    Join Date
    Dec 2007
    Location
    Central Queensland
    Posts
    3,468
    Total Downloaded
    0

    Glycol % in coolant

    Just been reading the castrol info and they reccomend a 35%-55% glycol concentration, what advantages/disadvantages/problems are there with running a higher %?

  2. #2
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    14,147
    Total Downloaded
    99.87 MB
    Without googling, I think it needs to be within that percentage as an optimum for things like cavitation protections etc. As I understand it, the Glycol also isn't as good at heat transfer so it will also reduce the radiators efficiency.
    Cheers
    Slunnie


    ~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~

  3. #3
    Join Date
    May 2007
    Location
    Safety Bay
    Posts
    8,041
    Total Downloaded
    0
    More glycol less cooling,as slunnie said it doesn't transter heat,water wetter fix's it though. Pat

  4. #4
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,501
    Total Downloaded
    0
    Im online with whats above,

    it makes the coolant "thicker" so it doesnt flow quite so well and the glycol coats the engine bits, more glycol means a thicker layer on the hot spots reducing flow over that exact spot.

    it also acts as an antifreeze so a thicker mix might be the ticket for the winter months in the mountains.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

  5. #5
    Join Date
    Dec 2007
    Location
    Central Queensland
    Posts
    3,468
    Total Downloaded
    0
    Quote Originally Posted by PAT303 View Post
    water wetter fix's it though. Pat
    trick is finding it in woop woop where i am

  6. #6
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,152
    Total Downloaded
    0
    AFAIK Land Rover recommend 50% in a 3.9 and that is what I have always used.
    I have never had overheating issues and NO visible corrosion which is more important IMHO.
    My core is now 9 years old with no problems using Nulon Longlife at 50% every two years.
    Regards Philip A

  7. #7
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    Glycol mixed with water is an anti-freeze/anti-boil.
    By increasing the % in water you reduce the freeze point and increase the boiling point but, as the fella's above point out, you reduce the overall heat transfer of the coolant but wait, there's more, by running at 50% you are running the optimum amount of corrosion inhibitors that are included with the glycol solution.
    Glycol by itself will not prevent corrosion, it'd probably accelerate it in some instances, so corrosion inhibitors are blended into the package.

    Run a a lower % and you effectively reduce the corrosion protection.
    Most data sheets suggest not running below 33% or thereabouts, and Land Rover say 50% and it's purely for corrosion control.

  8. #8
    Join Date
    May 2007
    Location
    Safety Bay
    Posts
    8,041
    Total Downloaded
    0
    Quote Originally Posted by Sprint View Post
    trick is finding it in woop woop where i am
    Do you want me to send you a bottle.Every one sells it in Kal as it's the only way to stop cruisers and patrols from running hot. Pat

  9. #9
    Join Date
    Dec 2007
    Location
    Central Queensland
    Posts
    3,468
    Total Downloaded
    0
    seems i may have spoke a lil too soon, rummaging through my box'o'goodies earlier i found a bottle of a brew called Mo'Cool, a product made by Motul, and upon doing a lil research, is apparently as good as Redline Water Wetter...... reason i didnt know what it was is because i got given it by a motul rep last summer after i mentioned noticing a few temp spikes when i was giving my XR8 a fair hiding, he just said to chuck it in the next time i did a coolant change, didnt say what it was though!

  10. #10
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    Quote Originally Posted by PAT303 View Post
    Do you want me to send you a bottle.Every one sells it in Kal as it's the only way to stop cruisers and patrols from running hot. Pat
    Pat, which one do you use ?
    The one with inhibitor (pink) or the diesel one (no inhibitor)

    The one with the inhibitor has been known to cause a sludge like substance that floats on the surface of the overflow tank in some cooling systems.
    I used to use Neo Keep Cool which also works very well.

    The Water Wetter, Keep Cool, MoCool are surfactants with added inhibitors that break down the surface tension of the water to get better heat transfer.

    BTW, any Redline product can be purchased through any Bursons store on the east coast.

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!