Results 1 to 4 of 4

Thread: will they fit?

  1. 27th June 2009, 11:49 AM #1
    worraps
    worraps is offline Master
    Join Date
    Jan 1970
    Location
    Brisbane
    Posts
    186
    Total Downloaded
    0

    will they fit?

    hi guys

    after picking up a nail in my old play tyres (and realy not worth being repaired ) i have decieded to get a new set

    currently running 31/10.5/15 bfg muddies with the rear trimmed and no rubbing

    i am thinking about going to 32/11.5/15 bighorn or similar
    now what i am wondering if what if any problems i am likly to
    encounter by going up an inch or am i better off just sticking
    with 31"

    any advice or opinions greatly apreciated


    Worraps
    Reply With Quote Reply With Quote
  2. 28th June 2009, 05:07 PM #2
    dullbird's Avatar
    dullbird
    dullbird is offline Admin Gold Subscriber
    Join Date
    Jan 1970
    Location
    Down the road from Sydney
    Posts
    14,702
    Total Downloaded
    0
    might be a good idea to tell people what car it is your fitting them too

    I'm assuming its a disco with the rear trim comment but better not to assume
    Our Land Rover does not leak oil! it just marks its territory.......



    Reply With Quote Reply With Quote
  3. 29th June 2009, 01:18 AM #3
    worraps
    worraps is offline Master
    Join Date
    Jan 1970
    Location
    Brisbane
    Posts
    186
    Total Downloaded
    0
    ahh whoops thought i had my signiture with specs
    96 disco tdi 2" lift rear qtrs trimmed the 31's i run now do not rub at
    all. just not sure how i would go with the extra width/height
    i don't mine chopping more if i need to

    as these are play tyres (everyday tyres 245/70/16) i want something
    midrange so as i do not have to alter diff/transfer case ratio's

    if anymore info is needed just let me know


    worraps
    Reply With Quote Reply With Quote
  4. 29th June 2009, 10:13 PM #4
    DEFENDERZOOK's Avatar
    DEFENDERZOOK
    DEFENDERZOOK is offline OldBushie
    Join Date
    Jan 1970
    Location
    SYDNEY -in the shire.....
    Posts
    8,196
    Total Downloaded
    0
    going one inch bigger in tyre diameter.......is only going to be half an inch bigger in radius......

    if you have more than half an inch clearance now.....then i dont think you should have a problem.......
    Reply With Quote Reply With Quote
« 300tdi bore inspection | Coils for 3.5 Rangie »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!