Results 1 to 6 of 6

Thread: TD5, Surging Badly above 2700rpm......????

  1. 4th July 2009, 07:46 PM #1
    Benny_IIA's Avatar
    Benny_IIA
    Benny_IIA is offline Wizard
    Join Date
    Oct 2008
    Location
    Brisbane
    Posts
    1,243
    Total Downloaded
    0

    TD5, Surging Badly above 2700rpm......????

    Hi Guys,


    Just got the old man’s D2 auto and when driven above about 2700 rpm. It surges badly,???

    I plugged in my nanocom it logs a fault saying.

    · EGR modulator short circuit. (will just replace witha removal kit)
    I tried changing the modulator over with one from my Defender but made no difference.


    Any ideas .

    Thanks Guys Ben
    Reply With Quote Reply With Quote
  2. 5th July 2009, 08:53 AM #2
    discowhite's Avatar
    discowhite
    discowhite is offline TopicToaster
    Join Date
    Jan 1970
    Location
    Padstow NSW
    Posts
    4,501
    Total Downloaded
    0
    too early to think about the surging but the egr fault is easy...
    step 1. remove the egr system and replace with http://www.aulro.com/afvb/verandah/8...stock-now.html.

    step 2. ignore the logged egr fault.

    limp mode wont surge, it will give you the feeling like the engine has no power...cos it wont..

    cheers phil
    Reply With Quote Reply With Quote
  3. 5th July 2009, 10:16 AM #3
    Benny_IIA's Avatar
    Benny_IIA
    Benny_IIA is offline Wizard
    Join Date
    Oct 2008
    Location
    Brisbane
    Posts
    1,243
    Total Downloaded
    0
    Thanks phil,


    Ben......
    Reply With Quote Reply With Quote
  4. 5th July 2009, 10:45 AM #4
    Graeme
    Graeme is online now Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,037
    Total Downloaded
    0
    Whilst surging can be caused by low fuel pressure due to a failing pump, it seems that the most common cause is faulty boost control allowing excessive boost, so the ecu cuts fuel. Faulty boost can be caused by a stuck/sticky wastegate, a faulty wastegate actuator or a faulty boost modulator. If the wastegate is free to move and the actuator diaphragm isn't holed (try sucking on the pressure tube) then bypass the modulator by connecting a tube from the turbo outlet pipe (below the A/C compressor) directly to the wastegate actuator. This will provide base boost which means it will go as well as a Defender until the modulator is replaced.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
  5. 5th July 2009, 01:23 PM #5
    scarry's Avatar
    scarry
    scarry is offline Swaggie
    Join Date
    Apr 2008
    Location
    Brisbane,some of the time.
    Posts
    13,888
    Total Downloaded
    0
    Mine surged badly at 3000 RPM & over & it was a faulty MAF sensor.

    Could be your problem.....

    If your fender is a TD5,swap them over & see how you go.
    Reply With Quote Reply With Quote
  6. 5th July 2009, 03:36 PM #6
    Benny_IIA's Avatar
    Benny_IIA
    Benny_IIA is offline Wizard
    Join Date
    Oct 2008
    Location
    Brisbane
    Posts
    1,243
    Total Downloaded
    0
    Cheers for the help guys, turns out one of the small black hoses had a hole in it, just bypassed the boost controler(i think thats what it is, its the small black box), and just plumbed it up like my defender. Seems to run fine. I will get new hose from Repco and plumb it back in.



    Ben.....
    Reply With Quote Reply With Quote
« Milford cargo barrier | 3.9 Rebuild Options »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!