Results 1 to 6 of 6

Thread: Using second hand rotors

  1. 9th December 2009, 07:50 PM #1
    DassaW's Avatar
    DassaW
    DassaW is offline Master
    Join Date
    Jan 1970
    Location
    Outer east Melb
    Posts
    128
    Total Downloaded
    0

    Using second hand rotors

    Guys,

    can you see any reason why I wouldnt be able to use some second hand rotors in my disco.

    I have a spare diff and the rotors are still nearly full thickness, and I need to change my worn ones on the rear of my disco. They have some surface rust which I have wire brushed off, and I will make sure I put new pads on with them.

    any thoughts?

    cheers

    Darren
    Reply With Quote Reply With Quote
  2. 9th December 2009, 07:58 PM #2
    Sprint
    Sprint is offline YarnMaster
    Join Date
    Dec 2007
    Location
    Central Queensland
    Posts
    3,468
    Total Downloaded
    0
    if theres no damage to them, i dont see why there would be a problem
    Reply With Quote Reply With Quote
  3. 9th December 2009, 08:26 PM #3
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,561
    Total Downloaded
    0
    providing theres no run out, the mounting holes arent damaged, no cracks in the face or the edge and over minimum thickness.

    if your happy they wont chew up the pads they're good to go
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  4. 9th December 2009, 09:24 PM #4
    Vern's Avatar
    Vern
    Vern is offline OldBushie
    Join Date
    May 2006
    Location
    Woolgoolga
    Posts
    7,870
    Total Downloaded
    0
    new rotors are cheap!
    Reply With Quote Reply With Quote
  5. 9th December 2009, 10:26 PM #5
    350RRC's Avatar
    350RRC
    350RRC is offline ForumSage Silver Subscriber
    Join Date
    Mar 2008
    Location
    Bellarine Peninsula, Brackistan
    Posts
    5,573
    Total Downloaded
    0
    Quote Originally Posted by DassaW View Post
    They have some surface rust which I have wire brushed off, and I will make sure I put new pads on with them.

    any thoughts?

    cheers

    Darren
    The pads bed to the rotors quicker if you leave the surface rust on. Feel extra grippy for a very little while too, till the bling shines through.

    cheers, DL
    Reply With Quote Reply With Quote
  6. 10th December 2009, 09:34 AM #6
    It'sNotWorthComplaining! Guest
    If your going to reuse them, then get them machined and checked by a brake specialist
    Reply With Quote Reply With Quote
« rear sals imput shaft | tropical thermostats »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!