Reply With Quote
It's in the workshop manual.
Cylinder head bolts - Engine numbers without
suffix B: + *
Bolts 11 to 14 - Outer row 60 Nm .................... 44lbf.ft
Bolts 2, 4, 6, 8 and 10 - Centre row 90 Nm ............. 66lbf.ft
Bolts 1, 3, 5, 7 and 9 - Inner row 90 Nm ............... 66lbf.ft
Cylinder head bolts - Engine numbers with suffix
B: + *
Stage 1 20 Nm .................................. 15lbf.ft
Stage 2 Then 90° ..................................
Stage 3 Further 90° ..................................
See also Engine->Overhaul- page 14 for the diagrams.
Some suggest doing the outer row up to a very low figure to minimise head warping. Later engines don't have those 4 bolts. As yours have 10 bolt heads, you don't have to worry.
SEQUENCE, should of asked this one with the first bit!!!!!!!!!!
Originally Posted by twitchy
Bookmarks