Page 8 of 12 FirstFirst ... 678910 ... LastLast
Results 71 to 80 of 116

Thread: Essential D3 D4 RRS travelling spares

  1. #71
    sheerluck Guest
    Quote Originally Posted by Ozzy119 View Post
    It was less than $80 and not at all hard to store. Part number PNH500025. I cable tied mine to the top of the cargo barrier, but it would easily fit under the back of the middle row of seats. Easy fit once the driver side wheel guard was removed.

    OP - its for a turbo diesel.
    Yes, that's the problematic intercooler to intake hose. Worth changing to a silicone hose to avoid future hassles. However, Ean was looking at the coolant hose and thermostat assembly (part number LR020009) that Land Rover in their wisdom sell as one part, and for the price of a small car.

  2. #72
    Ean Austral Guest
    I put 2 of the 3 silicon hoses on as I couldn't work out how the hell you got to the short turbo hose.

    For some strange I reason I still carry the 2 hoses I took off as emergency spares.

    Cheers Ean

  3. #73
    sheerluck Guest
    It's dead easy with the body off Ean.

  4. #74
    Join Date
    Jun 2013
    Location
    Nr Freo
    Posts
    49
    Total Downloaded
    0

    Update on previous

    Hi Guys

    I stated in the previous post for WA guys, that Southern landrover cannington will let you take a box of remote travel spares on a purchase or return basis,well it is still the case but they do require a C/C number from you in the event you dont return them by a date you specify to them ie a couple of months down the track.
    I picked mine up friday...........somewhere near $2500 i'm informed.
    Regards
    Sam
    2013 D4 .Llamms. Traxide. ARB C/C Bullbar.Outback Acc RWC & Longrange tank.

  5. #75
    Join Date
    Aug 2015
    Location
    Perth
    Posts
    1,215
    Total Downloaded
    0
    Quote Originally Posted by LRD414 View Post
    This may be useful to later model D4 owners. I think the suspension height sensors are VIN dependent. I had all these checked/confirmed by a Land Rover dealer service manager against my VIN.

    Front Wheel Speed Sensor - LR013783
    Rear Wheel Speed Sensor - SSB500102
    Suspension Height Sensor (front) - LR023646
    Suspension Height Sensor (rear) - LR023648
    Brake Light Switch - XKB500110
    Rear Suspension Link Rod Bolt (5 off) - RYG501580
    Air Filter - PHE000112

    The reference to "5 off" suspension bolts is from LRDirect website description. I haven't actually purchased any of these yet so can't confirm the bolt set.

    Rough pricing comparison is about $700 from dealer versus about $600 from UK (e.g. LRDirect) but that depends on which supplier or maker you select on the UK site.

    Cheers,
    Scott
    Hey Scott can you remember did you order 4 x height sensors and 4 x wheel speed sensors.

    My quote for all of the above with the 2 sets of sensors is coming in around $940AUD plus delivery(another $150ish) direct from the UK. 1 only of each would bring it down by $422 to $518 though.

    Looks like i'll have to try convince Southerns to lend me their box of goodies(my D4 came from Barbagallo, )

    Although not a travelling spare, my door seals(body only) have worn through and they're not too badly priced from Duckworths.
    LR044299 x 2 = ?98.59inc vat total
    LR037755 x 2 = ?99.13inc vat total
    = $330AUD

    Unfortunately the dealer was double that price at $615=( Would be nice to be able to go get original parts for a decent price in Perth..

  6. #76
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,033
    Total Downloaded
    0
    Only 1 of each in the D4 is required.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

  7. #77
    LRD414's Avatar
    LRD414 is offline Super Moderator Subscriber
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,737
    Total Downloaded
    0
    Quote Originally Posted by Graeme View Post
    Only 1 of each in the D4 is required.
    And that is all I purchased too.

    Scott
    D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
    Link to my D4 Build Thread
    D3 2005 V8 Petrol
    Ex '77 RRC 2 door. Long gone but not forgotten.

  8. #78
    Tombie Guest
    People really need to be more careful with seat belts and door seals when getting in and out of a vehicle.

    (One of my pet hates)

  9. #79
    Join Date
    Aug 2015
    Location
    Perth
    Posts
    1,215
    Total Downloaded
    0
    Quote Originally Posted by Tombie View Post
    People really need to be more careful with seat belts and door seals when getting in and out of a vehicle.

    (One of my pet hates)
    Yeah could have been seat belts on the drivers door. The right rear has definitely had a baby seat fitted for a prolonged time though and has worn through at the wheel arch curved area.

  10. #80
    Join Date
    Aug 2015
    Location
    Perth
    Posts
    1,215
    Total Downloaded
    0
    Added one set of rear wheel bearings and front hub assembly with bearing for GRR.

Page 8 of 12 FirstFirst ... 678910 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!