So it could be worth a shot. I could R&R the box and then get someone to do it up for me. I could even possibly give it a shot myself, just need to get the correct tools to do it.
Might be worth it!
Unless you can do the job yourself you are looking at a pretty high labour bill to remove/refit from vehicle and dismantle/inspect and reassemble. Bearings and synchros ballpark around $1000. Expect at least that much again for labour. Very time consuming job to clean/dismantle/inspect and reassemble.
Cheers......Brian
1985 110 V8 County
1998 110 Perentie GS Cargo 6X6 ARN 202516 (Brutus)
So it could be worth a shot. I could R&R the box and then get someone to do it up for me. I could even possibly give it a shot myself, just need to get the correct tools to do it.
Might be worth it!
you allready ready have a four speed in the other county, get a bellhousing for it and use that, just another option. the lt95 has a good reputation for standing up to the Isuzu.
Its a finicky sod of a box to setup properly, its doable with basic tools a press, some patients and inventiveness. it comes in a light (split casing) and heavy version.
its still better than a 77 to get right but its no match for an lt95. (but thats a 4 speed)
if the price and the concept of $2k to rebuild the box and potentially a further $2k to sort the steering gear and tcase is ok with you its probably worth it.
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
There was a LT85 (5 speed) box just passed in on Ebay for $500. I would have jumped at it but I just refurbished one- cost more than $500 too
It says no wear on the output shaft, so that's a good sign.
Landrover County Isuzu 3.9 LT85 Gearbox (eBay item 250710584896 end time 23-Oct-10 12:16:08 AEDST) : Cars, Bikes, Boats
Someone called Brian seemed interested
I just looked at Ebay & it's back there
http://cgi.ebay.com.au/Landrover-Cou...item3a5fe970c6
Hi all,
I have been thinking long and hard about this truck and I have decided I am not going to buy it as a truck for myself. I am going to stick with the v8 and make a fun rocket for myself. So it begs the question, is this thing something I should buy and wreck out or sell it on here. As stated earlier I need a firewall for my project and this one is in pretty good Nick. Would the engine and gearbox sell quick? Thoughts?
Rich
I would imagine the engine will sell but you might be stuck with the gearbox. They are virtually worth nothing if worn bad, but the transfer case could be ok.
Cheers......Brian
1985 110 V8 County
1998 110 Perentie GS Cargo 6X6 ARN 202516 (Brutus)
Personally I think you are insane choosing a v8 110 over a 4BD1. You could turbo and tune the 4BD1 to waste any rover V8.
120s are relatively rare. I would pass the info on and let someone else buy it who is going to fix it up. 110 firewalls are easy to come by in good condition.
FWIW - Mal Story (Maxi-Drive) rebuilt my LT85 for $4500 (!) - fortunately at the PO's expense. If and when it ever dies I will be fitting an R380 - or an Isuzu box.
Ashcroft has rebuilt LT85s for reasonbable prices (but whipping a duties would be a killer).
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks