Thread: LT85 bellhousing dimensions

Originally Posted by Lotz-A-Landies

What makes you say that? ? ? ?

It was listed as "Land rover bell housing suit Isuzu to santana 5 speed" which is pretty specific to me. Land rover bell housing suit Isuzu to santana 5 speed (eBay item 230610132170 end time 26-Apr-11 22:27:24 AEST) : Cars, Bikes, Boats

If it's not what it was advertised then let me know, so I can start the dispute process and inform the Police!

Because it doesn't have the circular spigot and the starter is on the opposit side to suit an Isuzu, looks rover V8 to me

Originally Posted by rovercare

Or if you ask really nicely I'll frieght it via startrack track express (formerly TNT was my provider) and give you the Bpay details and the cost price and you can fix up my account accordingly, like I;ve done for lots of members, unfortunately for Tony, but that one explains the change in freight provider

Thanks TonyMatt
I think I need to sort out Bearman's comment about it being a V8 bellhousing first. there is no way I'm paying over $300 for purchase and shipping of 5Kg ($3) worth of scrap aluminium.

The Vendor has suggested pickup only - so I would need to get it to you. Peter (Signal1) has offered to pick up, but I'm not happy to ask someone to do more than he's already offered.

Diana

Originally Posted by Lotz-A-Landies

What makes you say that? ? ? ?

It was listed as "Land rover bell housing suit Isuzu to santana 5 speed" which is pretty specific to me. Land rover bell housing suit Isuzu to santana 5 speed (eBay item 230610132170 end time 26-Apr-11 22:27:24 AEST) : Cars, Bikes, Boats

If it's not what it was advertised then let me know, so I can start the dispute process and inform the Police!

If it's the same one, have a look at the photo. It clearly shows a starter cutout on one side and NO clutch slave cylinder cutout on the other. The Isuzu housing does not have a starter cutout as it is mounted on the flywheel housing. I will post up a photo of each tomorrow so you can clearly see which one is the Isuzu one. I did send the seller a message informing him that what he had pictured was not an Isuzu housing but he more or less told me where to go.
I had deleted the listing from my computer but after looking at your one, that is the housing. Get your money back if you can, that's a V8 to LT85 housing not an Isuzu one.

Originally Posted by Lotz-A-Landies

Thanks Tony

I think I need to sort out Bearman's comment about it being a V8 bellhousing first. there is no way I'm paying over $300 for purchase and shipping of 5Kg ($3) worth of scrap aluminium.

The Vendor has suggested pickup only - so I would need to get it to you. Peter (Signal1) has offered to pick up, but I'm not happy to ask someone to do more than he's already offered.

Diana

First I'm Ben, now I'm Tony

Ben=Isuzurover

Tony=Rangier rover

Matt= Rovercare

Its door to door freight, just needs to be picked from their address



See my post above

and here is some more detail on the fact it is likely the wrong bellhousing



The front should look like this, see the full circle sticky outy spigot just inside the bolt PCD?

Starter on the opposite side?

Anyhow, Ta in advance for the apology on the name error

And another... (4-speed, but you get the idea).



My name is also not Tony (or Matt).

Looks like I'm back to square one!

Originally Posted by Lotz-A-Landies

Looks like I'm back to square one!

Incisor has an LT85 bellhousing to Isuzu last I knew, he did want a few beer tickets for it but

Signed Matt.....not Ben or Tony

Still awaiting an apology

Hey Matt, are you suffering from Multiple Personality Disorder?