Page 3 of 3 FirstFirst 123
Results 21 to 27 of 27

Thread: Dump Pipe

  1. 8th May 2012, 05:59 AM #21
    c.h.i.e.f's Avatar
    c.h.i.e.f
    c.h.i.e.f is offline Wizard
    Join Date
    Jul 2008
    Location
    Cessnock NSW
    Posts
    1,506
    Total Downloaded
    0
    Quote Originally Posted by lokka View Post
    Like john said to block the ends of the tube to keep in the argon is correct i cut discs and tape them on or cut plugs from soft wood and wedge in and will run a hole through one so i can fit in some gas hose i have a T or Y piece with another flow meter and i run the 2 flow meters off the one reg that way i can turn off the second one when not in use for purge work and it has a long hose with nothing on the end and i poke it through the cap end or wedge bung use a bit of masking tape to seal leaks and purge away .

    I dont mind doing the weld jobs at home if i have the time and you have the beer for my time and coin for consumables like gas and wire
    Sounds like you have it all sussed out then well im a few weeks away from intake work yet but I'll give you a call and organize something for one day your free and I'll bring the drinks maybe mick might gate crash too ..
    Reply With Quote Reply With Quote
  2. 8th May 2012, 02:31 PM #22
    cal415's Avatar
    cal415
    cal415 is offline ChatterBox Supporter
    Join Date
    Jan 1970
    Location
    Stockton, NSW
    Posts
    2,769
    Total Downloaded
    0
    Quote Originally Posted by c.h.i.e.f View Post
    mick might gate crash too ..
    It will probobly be done in my shed as thats were Chris' tig etc is at the moment

    Reply With Quote Reply With Quote
  3. 8th May 2012, 09:19 PM #23
    350RRC's Avatar
    350RRC
    350RRC is offline ForumSage Silver Subscriber
    Join Date
    Mar 2008
    Location
    Bellarine Peninsula, Brackistan
    Posts
    5,502
    Total Downloaded
    0
    So you get the beer?

    cheers, DL
    Reply With Quote Reply With Quote
  4. 9th May 2012, 11:00 AM #24
    c.h.i.e.f's Avatar
    c.h.i.e.f
    c.h.i.e.f is offline Wizard
    Join Date
    Jul 2008
    Location
    Cessnock NSW
    Posts
    1,506
    Total Downloaded
    0
    Quote Originally Posted by cal415 View Post
    It will probobly be done in my shed as thats were Chris' tig etc is at the moment
    Auh crap that's no good my parts might get infected by your petrol stuff
    Reply With Quote Reply With Quote
  5. 9th May 2012, 12:40 PM #25
    cal415's Avatar
    cal415
    cal415 is offline ChatterBox Supporter
    Join Date
    Jan 1970
    Location
    Stockton, NSW
    Posts
    2,769
    Total Downloaded
    0
    Quote Originally Posted by 350RRC View Post
    So you get the beer?

    cheers, DL
    Nah i think it just means he needs to bring MORE beer haha

    Reply With Quote Reply With Quote
  6. 26th April 2014, 02:32 PM #26
    Boof Ed
    Boof Ed is offline Fossicker Subscriber
    Join Date
    Jun 2010
    Location
    Cairns QLD
    Posts
    90
    Total Downloaded
    0
    Saw this old thread while doing some research. Here is mine, hopefully helps others. Similar to what Bush56 talks about. I used a donut though. First time oxy welding so be nice re: the welds.
    Attached Images Attached Images
    Reply With Quote Reply With Quote
  7. 16th May 2014, 09:33 PM #27
    Jock The Rock
    Jock The Rock is offline ChatterBox
    Join Date
    Mar 2008
    Location
    TBA
    Posts
    2,328
    Total Downloaded
    0
    To add mine as well, had a fella make it up for me. He is brilliant with his fabrication

    It's ceramic coated just for a bit of bling the rest of the exhaust is stainless

    Reply With Quote Reply With Quote
Page 3 of 3 FirstFirst 123
« 110 Isuzu air-con compressor | Fuel hose going to Injector Pump »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!