Thread: noise

I get a scrapping tinny noise as I slow down. It stops when I use the clutch. Thought it was the clutch, but I pulled the box out and it looks fine.
Any ideas ?

Originally Posted by Gavo

It was the pivot pin that was loose in the bell housing.

There's a couple of mods you can do to fix this Gavo. One is to drill a hole through the bell housing and the pivot pin and use a roll pin and loctite to secure it other way is to weld a bolt shank onto the end of the pin and drill the hole right through the bellhousing and secure with a nyloc nut and loctite. Should never come loose again.