Page 4 of 7 FirstFirst ... 23456 ... LastLast
Results 31 to 40 of 62

Thread: I need a bigger engine....

  1. #31
    Join Date
    May 2006
    Location
    Woolgoolga
    Posts
    7,870
    Total Downloaded
    0
    Just buy a land cruiser, it will complete your grey nomad look you are going for with that massive caravan thingy

  2. #32
    Join Date
    Oct 2012
    Location
    FNQ
    Posts
    1,723
    Total Downloaded
    0
    Maybe a bigger motor 8.2 four stroke Detroit 230 HP @2800 510 ftp@1700 nice clean motor no injector pipes no electronics Does`nt know what a hill or headwind is. With the added bonus of a 4" exhaust from the back of the V thru between the seats you wont need a heater and bout 18 MPG

  3. #33
    Join Date
    Sep 2007
    Location
    Kiwiland
    Posts
    7,246
    Total Downloaded
    0
    Quote Originally Posted by Sitec View Post
    6Bdt... Fit your box, sound nice, have smoother torque delivery so the box might survive, and have plenty of go... or rebuild your engine with larger turbo, dustbin of an intercooler and lighter flywheel so it'll rev and give it some legs at the top end like the newer diesels... Just my thoughts...
    Almost but not quite.
    Compound turbo and heavier flywheel.

    Light flywheels are complete **** on a diesel. When you double the torque, you need to double the flywheel to keep torsional vibrations the same.

  4. #34
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    Quote Originally Posted by lokka View Post
    6BD1T will give it more go and it will drink more

    The 1HD-FT in my old mans 80 pulling either the small 18ft 1500KG van or the 24ft 2500KG tajhmahal on tyres will happly put the diesel out the back at 17Lper100K tho a head wind will see it go up near 20Lper100K

    My non turbo county pulled my rangie 1900KG+900odKG float along the flat would happly do 120kph tho back to 2nd on the real steep hills near sussex inlet and did roughly 13Lper100K

    My TDI disco towing my camper trailer fully loaded plus loaded roof rack which was mainly wind resistance and unsure on weight of trailer could not hold speed in 5th and was happy to sit on 100K in 4th running 265x75x16 on standard gearing returned 13.8Lper100K

    Tart up the 4BD1 maby fit a better rad so it dont get hot or try and scoop more air through the current set up and take in the sights cruising in a county wins hands down as long as the sound of the isuzu dosent bother you
    That hits the nail on the head Chris,

    JC
    The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
    The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈

  5. #35
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    Quote Originally Posted by Vern View Post
    Just buy a land cruiser, it will complete your grey nomad look you are going for with that massive caravan thingy
    ...Not helping Damien....


    and I am not grey yet, I will however one day be completing the whole grey bit but not for quite some time thanks!!!!!

    JC
    The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
    The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈

  6. #36
    Join Date
    Sep 2008
    Location
    Geelong, VIC
    Posts
    4,442
    Total Downloaded
    0
    Interesting discussion. We're considering a fully height van for an extended trip in a few years time, and intending on it being towed with a 4bd1T...

    JC - IIRC you also have A/C fitted? If so I wonder how much effect that's having on the cooling side of things? I'm guessing at this time of year you probably weren't running it but would it affect things even just from an airflow perspective?

    Will be really interesting to hear back about what change a rebuild and tickle up make if you do them.

    Steve
    1985 County - Isuzu 4bd1 with HX30W turbo, LT95, 255/85-16 KM2's
    1988 120 with rust and potential
    1999 300tdi 130 single cab - "stock as bro"
    2003 D2a Td5 - the boss's daily drive

  7. #37
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    Hi Steve, yes A/C condenser is in, but not utilised at the time. The temp isn't really an issue it just creeps up to around 90 from the usual 82, but this is cool weather so i am anticipating issues in higher ambients.

    I am confident that with some restored compression, a set of overhauled injectors etc will see a marked improvement, although it seems reading these posts that maybe it isn't all that bad anyway.

    You'll have to wait a while for more reports Steve,, won't be in holiday mode again for quite a time. Still can test the effects towing car trailers about for work

    JC
    The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
    The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈

  8. #38
    Join Date
    Dec 2007
    Location
    Sydney, you know. The olympic one.
    Posts
    4,853
    Total Downloaded
    0
    If he buys a Cruiser and a Nomad sized van he'll be able to walk from one end of the island to the other without going outside.

  9. #39
    Join Date
    Jul 2006
    Location
    Brisbane, Inner East.
    Posts
    11,178
    Total Downloaded
    0
    Aerodynamic aids have almost no effect under about 60 mph. Frontal area is the factor at low speeds. I still have the text books "Principles of Vehicle Selection" and "Motor Truck Engineering Handbook". Use the given formulae to calculate horsepower requirement according to frontal area, mass, rolling resistance, grade, etc.
    URSUSMAJOR

  10. #40
    Join Date
    Sep 2007
    Location
    Kiwiland
    Posts
    7,246
    Total Downloaded
    0
    Quote Originally Posted by Brian Hjelm View Post
    Aerodynamic aids have almost no effect under about 60 mph.
    Ever ridden a bike Brian?
    At 20km/h wind resistance can be a huge concern. It all depends how much power it takes and how much power you have.

    But regardless of power. There are fuel economy savings to be had at all speeds with aerodynamic improvements.

    Quote Originally Posted by Brian Hjelm View Post
    Frontal area is the factor at low speeds. I still have the text books "Principles of Vehicle Selection" and "Motor Truck Engineering Handbook". Use the given formulae to calculate horsepower requirement according to frontal area, mass, rolling resistance, grade, etc.
    Force = Cd*A*1/2*airdensity*velocity^2

    Cd for a landrover is about 0.6 (pretty lumpy, many cars are below 0.3).
    A is your frontal area in square metres.
    Air density is ~1.2 kg/m^3
    Velocity is in metres/second. 100km/h = 27.7777778 m/s.

Page 4 of 7 FirstFirst ... 23456 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!