Results 1 to 3 of 3

Thread: Stage 1 Sound proofing

  1. 16th July 2014, 06:59 PM #1
    Kaiser
    Kaiser is offline Fossicker
    Join Date
    Jul 2012
    Location
    Hazelbrook Blue Mtns NSW
    Posts
    22
    Total Downloaded
    0

    Stage 1 Sound proofing

    Hi all
    I recently acquired a stage 1, 3.9 diesel hard top. I have posted a couple of post regarding info on some items, but would like some insight into the sound proofing that is installed. The bonnet has had sound proofing fitted that is no longer there other than the left over contact glue.
    The inertia guards still have sound proofing with silver foil over it and 90% in tact.
    Within the cab is a 15-20 mm layer of yellow foam that looks professionally installed all over the floor, transmission tunnel and fire wall with black vinyl laid over it.
    It is so well done that it does not look like the floor panels have ever come out.
    Is this a "factory/dealer" install or aftermarket install.

    Is there any "sticky" things for stage ones as I am continually searching the site for info on these vehicles.

    Ta
    Andrew
    Reply With Quote Reply With Quote
  2. 17th July 2014, 11:36 AM #2
    Judo's Avatar
    Judo
    Judo is offline ChatterBox Silver Subscriber
    Join Date
    Feb 2012
    Location
    Parkdale, Melbourne
    Posts
    2,919
    Total Downloaded
    0
    All sounds very custom and post factory to me! There are plenty of sound proofing threads about if you use the left hand side search field at the bottom of the page.

    To be honest, I'm not sure where Stage1's fit on here. Were they ALL Isuzu engines? Here seems as good as anywhere! (I stand to be corrected)
    - Justin

    '95 Disco 300TDI - sold
    '86 County 110 Isuzu
    2006 Range Rover Vogue td6
    Reply With Quote Reply With Quote
  3. 17th July 2014, 11:51 AM #3
    Distortion's Avatar
    Distortion
    Distortion is offline Master
    Join Date
    Aug 2008
    Location
    Perth, WA
    Posts
    521
    Total Downloaded
    0
    Seems to be around the same ratio the V8 to Isuzu for 110s

    I've certainly seen more V8s than isuzu stage1s
    Reply With Quote Reply With Quote
« Switched 12 volt supply under the bonnet of a Perentie. | engine oil »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!