Thread: LT 95 gear stick

It might not, see if the distance from the ball to the bottom lug is the same ( if that makes sense) They can be different lengths.

Originally Posted by mattmac

I'm assuming LT95 county and RR gearstick are different as have just purchased a county that has had RR LT95 fitted (replaced original 5 speed) but the stick shaft is straight and hits the edge of the cubby box when selecting reverse- from memory the the county Lt95 gearstick shaft has a kink in it and should solve the problem-i assume they're interchangeable?

They are but you have to get the correct one for the box vintage. The early RR LT95's had a ball end whereas the later ones ('82-'84)and the 110 boxes have a blade type end. Also the gearstick is shaped differently from RR to 110. If your gearbox serial number ends in B or C it is a ball end, The later boxes end in A and all have the blade end. You can actually fit the blade type to the early ones but they are a bit sloppy. Easiest fix for you is to use the hot spanner and bend your stick to suit the 110.