Suggestions for rebuild kit suppliers

Quote:

---

Originally Posted by workingonit

Was talking to someone off line and conversation got around to 4bd1 engines and rebuilds.

Comment was made that Isuzu were selling rebuild kits on special (Perth somewhere).

Further, that when you take the head off there should be an individual marking or ID for each liner.

The liners in the kit did not seem to take account of this and some people were finding the liners not necessarily going in as tight as they should be, resulting in 'noisy' engines.

Don't know how correct all this is but maybe something to look out for as head is removed and mention to Isuzu.

---

Any idea of where and how much?

It was in like an hour and a half talk with Mockey - him paying for the phone call!! Sounds like a nice guy and lots of knowledge. Don't know his number. PM him. From memory $800 from Isuzu Perth.

Quote:

---

Originally Posted by paulthepilot_5

Thanks for the info Isuzurover,

Out of curiosity do you know if the 4BB1 and 4BD1 use the same length liner? are they interchangeable? I'm thinking not because of the longer stroke length of the 4BD1

Cheers

---

Not a source that I'd want to bet my house on, but this looks like they may be the same:
Isuzu Cylinder Liner 6BD1T, OEMNO:4BB1/4BD1/ 6BB1/6BD1 The Liner Size Is The Same As Each Other. Liner Kit: 1-87811-353-0 1-87810-366-5, Application:Isuzu 6BD1T


Steve

Quote:

---

Originally Posted by workingonit

It was in like an hour and a half talk with Mockey - him paying for the phone call!! Sounds like a nice guy and lots of knowledge. Don't know his number. PM him. From memory $800 from Isuzu Perth.

---

Yeah i have michaels number, he is my saviour 😆. Will give him a call when i get home

Quote:

---

Originally Posted by steveG

Not a source that I'd want to bet my house on, but this looks like they may be the same:
Isuzu Cylinder Liner 6BD1T, OEMNO:4BB1/4BD1/ 6BB1/6BD1 The Liner Size Is The Same As Each Other. Liner Kit: 1-87811-353-0 1-87810-366-5, Application:Isuzu 6BD1T


Steve

---

Looks like they might be the same, anybody have a 4BD1 liner they could measure the length of? Would be handy to be able to just get 4BD1 liners and pistons :D

Cheers Paul