Thread: Isuzu rear crank seal

Originally Posted by Vern

Will try the new style seal and see how it goes

You will need the tool to install the new type as you have to drive the seal and the sleeve together, I made one up from 2 pieces of pipe.

Will see if i can find some info on it. Can i get the seal from a bearing place or only isuzu?

Apart from the link to that one on ebay which appears to be a counterfeit copy, I think only LR sell them. That BYG number is LR and not Isuzu. Pretty sure it only came about because the ADF had so much trouble with leaking rear seals. I do have a SKF number somewhere at home (up north atm) won't be home until Tuesday. I think it's in an old thread here somewhere. I believe SKF manufactured them for LR. I can chase it up when I get home if you like.

So the skf number is the new seal??

I'm not sure. Probably only through LR - that's what usually happens with these AYG/BYG parts.

Originally Posted by Bearman

You will need the tool to install the new type as you have to drive the seal and the sleeve together, I made one up from 2 pieces of pipe.

Brian, whats the sleeve for?? Little confused as to why itals a 2 part seal, is it like a speedy sleeve??

Originally Posted by Vern

Brian, whats the sleeve for?? Little confused as to why itals a 2 part seal, is it like a speedy sleeve??

Yes exactly that. It is a sleeve integrated into the seal. The sleeve has a lip turned over so you cannot remove it from the seal part and consequently they both have to be installed together.

Ok. Will chase one up next week.
Now just gotta think what else i may need from isuzu.
Cheers