Thread: The 4BD1 Part Numbers Reference

Are the axle drive flanges on a Perentie the same as a standard 110?
Anyone recommend the best place to buy them?

Originally Posted by mick88

Are the axle drive flanges on a Perentie the same as a standard 110?
Anyone recommend the best place to buy them?

Same as a county FRC5806. Defender 110 ones are shorter splined.

hello have 110 perentie gs 5300km bought feb 2015 sold in auction feb 2014 in minto nsw.

Anyone have a list of gasket part numbers? Looking mainly for timing case etc....
Also can part number for new two piece rear main be added to here?

I was having a hard time finding the filters matching these part numbers for my 87 county 4BD1 here in the States, so I wanted to post these in case they are of any use to anyone else in the future. The Wix is widely available. Baldwin less so. Ryco one may cross-reference. Donaldson not available or cross referencable here at all from my searching. Though I won't be buying from Amazon, I'm listing current prices there for reference; mileage may vary (pun intended):

Oil Filter:
Element ? WIX | Part # 51745 (cartridge filter) / Baldwin P266 /
Amazon (USD16.71)

Fuel Filter:
Element ? Wix | 33259 / Ryco R2411PA
Amazon (USD13.67 ea)

Air Filters:
Outer Element - WIX | Part # 42868 / Baldwin PA1822-FN / Donaldson P90-0433
Amazon (USD44.05)
Safety Element - WIX | Part # 42679 / Baldwin PA2332 / Donaldson P90-0434
Amazon (USD28.94)

I hope this information may be useful for someone else down the line who is also a fortunate owner of a JRA 110 4BD1+T.

G'day Gents,

I'm looking for the part numbers on the genuine Isuzu full rebuild kits.

I have a ex-army 4BD1 which I will turbo..... so I'm after, I think, a 4BD1T kit that will suit the ex-army engines.

I've trolled through this thread but didn't see any listing for full reco kits.

I spoke to the guys at Gilbert & Roach Newcastle but they can't help me without a VIN or specific part number.

Cheers,

Jason

Originally Posted by Fubar

G'day Gents,

I'm looking for the part numbers on the genuine Isuzu full rebuild kits.

I have a ex-army 4BD1 which I will turbo..... so I'm after, I think, a 4BD1T kit that will suit the ex-army engines.

I've trolled through this thread but didn't see any listing for full reco kits.

I spoke to the guys at Gilbert & Roach Newcastle but they can't help me without a VIN or specific part number.

Cheers,

Jason

Have a search in the isuzu section for a vin number, pretty sure its been posted. SteveG may have had one.
Or try Paterson Cheney Isuzu, have always been very helpful

Originally Posted by Vern

Have a search in the isuzu section for a vin number, pretty sure its been posted. SteveG may have had one.
Or try Paterson Cheney Isuzu, have always been very helpful

Will do.

Thankyou