Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20

Thread: turbo kit arrived

  1. #11
    lewy is offline Wizard Silver Subscriber
    Join Date
    Jan 1970
    Location
    darwin
    Posts
    1,502
    Total Downloaded
    0
    come on mate.how's that engine,

  2. #12
    Join Date
    Apr 2007
    Location
    Ipswich QLD
    Posts
    249
    Total Downloaded
    0
    I'll be very interested to see how the fit goes and where you mount that meter. Any chance of posting photos when you're done?

  3. #13
    Join Date
    Jan 2008
    Location
    Sydney, West
    Posts
    1,241
    Total Downloaded
    0
    lewy, things are going well but it all takes so long, I took the injectors out today to get rebuilt, this weekend I will fit the rebuilt lt95 and get the engine into position to check the new mounts will work then tac weld them in. its going to be a long weekend i think.


    county3.9, turbo numbers are.
    MF0057S
    8971056181
    466409-L
    the intake has .48 on it and the exhaust has .67

    hope this helps mate.

  4. #14
    Join Date
    Sep 2007
    Location
    Kiwiland
    Posts
    7,246
    Total Downloaded
    0
    Quote Originally Posted by lambrover View Post
    lewy, things are going well but it all takes so long, I took the injectors out today to get rebuilt, this weekend I will fit the rebuilt lt95 and get the engine into position to check the new mounts will work then tac weld them in. its going to be a long weekend i think.


    county3.9, turbo numbers are.
    MF0057S
    8971056181
    466409-L
    the intake has .48 on it and the exhaust has .67

    hope this helps mate.
    That's the factory turbo off the later 4BD1T's and 4BD2T's. The part numbers match exactly.
    Compressor is a 51.3/40mm wheel (standard 60 trim T25).
    Turbine is a 55/42mm wheel.
    A/R's already mentioned.

    The 897 number should be an Isuzu part code.

  5. #15
    Join Date
    Jan 2008
    Location
    Sydney, West
    Posts
    1,241
    Total Downloaded
    0
    got the gearbox mounted in and the new engine mounts fully welded in today it went alot easier than I thought it was going to be.

  6. #16
    Join Date
    Jan 1970
    Location
    Darwin
    Posts
    462
    Total Downloaded
    0
    Things are busy mate, I have found the time to put new injectors into the wifes Disco and squeeeeeezed in a 150ltr fuel tank. Going to get full advantage of those 40c off shopper dockets
    Did you weld the new mounts onto the chassis

    Cheers

  7. #17
    Join Date
    Jan 2008
    Location
    Sydney, West
    Posts
    1,241
    Total Downloaded
    0
    Quote Originally Posted by Larns View Post
    Things are busy mate, I have found the time to put new injectors into the wifes Disco and squeeeeeezed in a 150ltr fuel tank. Going to get full advantage of those 40c off shopper dockets
    Did you weld the new mounts onto the chassis

    Cheers
    good to here you are busy mate, have you soughted out that squeak in the disco.

    yes I welded them in, I got some gas for my mig.
    has guss done anything with his car yet.

  8. #18
    Join Date
    Apr 2007
    Location
    Ipswich QLD
    Posts
    249
    Total Downloaded
    0
    Got the turbo in yet?

    How much does the Madman monitor cost these days?

  9. #19
    Join Date
    Jan 2008
    Location
    Sydney, West
    Posts
    1,241
    Total Downloaded
    0
    Quote Originally Posted by County3.9 View Post
    Got the turbo in yet?

    How much does the Madman monitor cost these days?
    I think it was about 500 bucks

  10. #20
    Join Date
    Apr 2007
    Location
    Ipswich QLD
    Posts
    249
    Total Downloaded
    0

Page 2 of 2 FirstFirst 12

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!