Thread: Snorkel Vibration Isolation

If they are about the isuzu heres a good place for the pics.

I've never had any issues with mine other than popping the odd rivet out of the rear bulkhead. If you keep the idle up around 900 rpm it shouldn't be as bad. My snorkel is well supported though.

On my previous 110 Isuzu I had a snorkel. The snorkel was originally fixed to the windscreen frame with a couple of fairly large single screws. They kept falling out on corrugated roads especially. I ended up welding on a piece of angle that sat on the front AND side of the windscreen frame. It was attached by about 3 or 4 rivets on each plane of the angle. It never came off again. I hope this makes sense.

All done , thanks guys.

Screwed down hard to the wing and pop rivetted solid to the A Pillar.

Pete

cool but do what he said, best thing i ever did, but i back it off when going bush

Originally Posted by Rangier Rover

I've never had any issues with mine other than popping the odd rivet out of the rear bulkhead. If you keep the idle up around 900 rpm it shouldn't be as bad. My snorkel is well supported though.

I will do Clean , but I'm having tacho envy

I see you're fitting one

My mate and I upped the idle revs to less shake setting when I first picked it up.

Originally Posted by land864

I will do Clean , but I'm having tacho envy

I see you're fitting one

My mate and I upped the idle revs to less shake setting when I first picked it up.

in set the idle to a bit above factory on a coldish day, but thats no good when it hot and the aircon is on, so when its hot like now i up it again but only with the cable. i feal there is about 200 rpm difrence between hot and cold idleing but will know more once the tacho turns up. i am redoing my dash, honda civic heater controls a boster fan and my own pluming, thats on the cab side using Vents with there own on off toggel . under the bonett i will make up a new box, using dunnydoor core and a mitzy fan. the boxs will be made from fiberglass. the heater core will have a hot water shut off. it will all be electric using supercheep actulators, quite simple realy
and hopefully it will drain a bit less off the crank

Interested to see that a/c heater under bonnet set up when you've finished.

I was thinking of doing a similar thing with a better fan and a better a/c coil.

Sorry , I forgot to look . Is yours turbo'd ?

Pete