Finished the Merc. today, here is a couple of piccies.......:D
https://www.aulro.com/afvb/images/im...013/04/865.jpg
https://www.aulro.com/afvb/images/im...013/04/866.jpg
Printable View
Finished the Merc. today, here is a couple of piccies.......:D
https://www.aulro.com/afvb/images/im...013/04/865.jpg
https://www.aulro.com/afvb/images/im...013/04/866.jpg
Certainly was a challenge for the old eyes. Hey, John, don't you start!!!!:D
We had our monthly meeting for SLOw today at the Goodna RSL, top food there and great company:)
Everyone is thankful for the magnets and pens Tony and can't wait to meet you:D
We took 'connie-sue' she stopped about 1.5 k's from the RSL, scallops came to the rescue and towed us there for her to start to drive into the car park:D
coming home we made it to our driveway:) When she gets hot and I take my foot off the accelerator she seems to die and sometimes backfires, any ideas Jason? We did buy a new coil today as it was very hot.
Will fit that before we next take her out.
Mrs hh:angel:
It could be the coil , they do get hot but not to hot..Try the coil see how it goes..It could be a fuel problem to ,When it gets hot things expand so does the carby so could cause a leak or a sucktion.Carby's leak through the ventri shaft & will run rough or die from fuel starvation..But i'd start with the coil & dizzy..You can get the electronic convestion for your standard dizzy for under $50 on ebay i think ,That will help to..Landy engines arent the best to get the timing set corectly either ..Also chech & adjust all the valves , But they must be done right you cant just go along in the line & adjust them.theres a set order to do them.All in the manual..Quote:
Originally Posted by The ho har's
a week and a half until take off Brian. We will need to start having a bit of a plan/think.
Also if its heating up a bit its best to check & reset all the valves to, that can cause heating..& alot of other stuff..Quote:
Originally Posted by The ho har's
Had a diesel 2.1/4 years ago wouldnt start & run..Had lots of people come look it over but could'nt sort it so i desided to check & reset the valves. Started first push on the button & ran realy smooth..
I will be doing a Petrol 2.1/4 rebuild thread towards the end of the week on how to rebuild one & all the settings & they way they go together..YES I AM BORED..Spent the last few weeks hand cleaning every part of it..OH & a trick for the front engine crank seal.:D..
Yes Tony, I am arriving Friday lunnch time by air
pm me your ph number and ill call u.
Hey Jim, how about Sunday for coffee?
this is from the other night and playing around with the new photobucket.
https://www.aulro.com/afvb/images/im...013/04/714.jpg
Good shot Tony, nice bar, shame about that smurf butterfly that got in the shot!!!
Sounds good Brian, I am off on Sunday. PM me the pick up address.:D Would about 10am suit???:)Quote:
Originally Posted by Brian