Thread: Embarrassment

Originally Posted by drifter

Hey Banjo:

Got a bit of lift.

Before:


After:

Looks good.. I would of bolted the top part on the gal capping so would give more lift & use a plate or angle iron on the bottom inside , Or a piece of plate bolted to the chassis for the bottom mount.. :-)

Originally Posted by banjo

Looks good.. I would of bolted the top part on the gal capping so would give more lift & use a plate or angle iron on the bottom inside , Or a piece of plate bolted to the chassis for the bottom mount.. :-)

The one I made for the green one it bolts to the capping & I made a plate with bracket for the bottom & it sits a lot higher..

I did think of that, briefly.

There is one of those strengthening panels in behind the galv and it doesn't have crush tubes so I would have flattened it.

I haven't tried to put the trailer on yet - have had other problems, including spending most of the morning in A&E so it won't get looked at until I have 2 working eyes again...

If the trailer doesn't fit then I'll take it up another inch or so...

Originally Posted by drifter

I did think of that, briefly.

There is one of those strengthening panels in behind the galv and it doesn't have crush tubes so I would have flattened it.

I haven't tried to put the trailer on yet - have had other problems, including spending most of the morning in A&E so it won't get looked at until I have 2 working eyes again...

If the trailer doesn't fit then I'll take it up another inch or so...

Drilling or grinding without glasses on ??

nah

white tail spider.

check email

Hey guys, we have made 800 pages!!!!! congratulations to us!!!

Originally Posted by Ausfree

Hey guys, we have made 800 pages!!!!! congratulations to us!!!

Will this post flip it to 801 ??

Maybe not !!

Didn't get to go off roading as the "Tag along Toyota" didn't turn up