Page 1 of 4 123 ... LastLast
Results 1 to 10 of 32

Thread: In line fuel pump

  1. 15th May 2011, 06:18 PM #1
    The ho har's's Avatar
    The ho har's
    The ho har's is offline LordRover Subscriber
    Join Date
    Jan 2007
    Location
    Logan Village area S.E. QLD
    Posts
    17,686
    Total Downloaded
    0

    In line fuel pump

    What size/volume in line fuel pump is required for a 3.5ltr rover

    Mrs hh
    Series Landy Rescue

    Parts, welding, finger folding, Storage, Painting, Fabrication, Restorations,
    Our FB Page..
    https://www.facebook.com/SeriesLR?ref=bookmarks

    '51 80", Discovery 2, Defender 130, 101 FC + 20 other Land Rover vehicles
    Reply With Quote Reply With Quote
  2. 15th May 2011, 06:47 PM #2
    101 Ron's Avatar
    101 Ron
    101 Ron is offline YarnMaster
    Join Date
    Jan 2008
    Location
    Nowra NSW
    Posts
    3,906
    Total Downloaded
    0
    In the 101 the standard fuel pump is inside the fuel tank.
    My 101 still has it fitted as a back up, but it is not used as a normal 3/4 psi after market fuel pump is fitted and has been doing the job for years.
    If you look at the following pic carefully on the bottom RHS you can see it on the chassis.
    Any electric aftermarket fuel pump for a carby motor will do the job....eg faucet brand.
    Reply With Quote Reply With Quote
  3. 15th May 2011, 07:39 PM #3
    101RRS's Avatar
    101RRS
    101RRS is offline LordRover Supporter
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,616
    Total Downloaded
    0
    I carry one of these in my spares in case the original one in the tank plays up.

    Electric Fuel Pump 12volt Solid State 1.5-3.5psi 57 LPH | eBay
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon
    Reply With Quote Reply With Quote
  4. 15th May 2011, 08:02 PM #4
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,495
    Total Downloaded
    0
    1l/min @ 4psi.

    all as per previously mentioned, I have 4 on fozzy for shifting fuel around and one spare. only one of them was purchased new, the rest from wreckers for about $10 a piece or garage sales for not much more.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  5. 16th May 2011, 02:36 PM #5
    Grimace's Avatar
    Grimace
    Grimace is offline YarnMaster Silver Subscriber
    Join Date
    Jan 1970
    Location
    Gold Coast, QLD
    Posts
    3,570
    Total Downloaded
    0
    crap so I can assume 4.4L/min at 50psi (rail pressure) is well and truly overkill??
    That's the specs of the walbro pump sold to me to suit my supercharged application...
    I rule!!!

    2.4" of Pure FURY!!!
    Reply With Quote Reply With Quote
  6. 16th May 2011, 04:15 PM #6
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,495
    Total Downloaded
    0
    yep with that many PSI going into a carby you'll force past the needle and seat and flood it out..

    for injected thats about right, if you want better patterning out of the injectors or are running your blower at much over 10psi then you want to be looking at the 60-70psi range.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  7. 16th May 2011, 05:56 PM #7
    The ho har's's Avatar
    The ho har's
    The ho har's is offline LordRover Subscriber
    Join Date
    Jan 2007
    Location
    Logan Village area S.E. QLD
    Posts
    17,686
    Total Downloaded
    0
    series 3 in line pump is 12v what amps does it pull as 101 is 24v and the step down is 20 amp it runs the coil ? any ideas

    ho har
    Series Landy Rescue

    Parts, welding, finger folding, Storage, Painting, Fabrication, Restorations,
    Our FB Page..
    https://www.facebook.com/SeriesLR?ref=bookmarks

    '51 80", Discovery 2, Defender 130, 101 FC + 20 other Land Rover vehicles
    Reply With Quote Reply With Quote
  8. 16th May 2011, 05:59 PM #8
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,495
    Total Downloaded
    0
    bout 2-4 amps depending on voltage and condition.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  9. 17th May 2011, 09:06 PM #9
    101RRS's Avatar
    101RRS
    101RRS is offline LordRover Supporter
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,616
    Total Downloaded
    0
    Quote Originally Posted by The ho har's View Post
    series 3 in line pump is 12v what amps does it pull as 101 is 24v and the step down is 20 amp it runs the coil ? any ideas

    ho har

    The fuel pump in a 24v 101 is actually 12v and the coil actually runs on 10V.

    Garry
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon
    Reply With Quote Reply With Quote
  10. 17th May 2011, 09:29 PM #10
    Mick_Marsh's Avatar
    Mick_Marsh
    Mick_Marsh is offline Swaggie
    Join Date
    Nov 2009
    Location
    Western Victoria
    Posts
    14,101
    Total Downloaded
    0
    I bought a Goss GE206 as a backup pump.
    20 kPa, 93 l/h, 24V, 0.8 A
    Is this suitable?
    Reply With Quote Reply With Quote
Page 1 of 4 123 ... LastLast
« The New Perentie ( Land Rover That Is ) oh and a very rare 6x6 FC82 | 101's and lightweights ? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!