Page 7 of 19 FirstFirst ... 5678917 ... LastLast
Results 61 to 70 of 188

Thread: JayBoRovers 101

  1. #61
    Join Date
    Oct 2010
    Location
    Perth
    Posts
    1,191
    Total Downloaded
    0
    Quote Originally Posted by Brute View Post
    Did the same to mine last weekend John, did the back first. 40 mm of flare is all that's needed, did 40mm at the front too and then realised the front track is about 1" wider than the rear. Hopefully it will be good enough for the pits.
    Mine is a 40mm flare too. I only measured the tyre protrusion at the back though because the front tyres weren't pointing straight ahead when I went out to do the measuring. I hadn't thought about the front track being different. I might have to check that one so thanks for the heads-up. I would have assumed the body would be panelled out to the same cover for the front regardless of the track, so would have thought the same 40mm extension should do it.

    When are you going to be ready for the pits?

  2. #62
    Join Date
    Sep 2008
    Location
    Parkerville WA
    Posts
    553
    Total Downloaded
    0
    I,m pretty close John, just need to follow up on Stu's tip for the wipers, get theW4 challenge out of the way, and sort the engine so it runs better. I,m going to do the pits without a roof so hopefully that will be ok. What about you

  3. #63
    Join Date
    Oct 2010
    Location
    Perth
    Posts
    1,191
    Total Downloaded
    0
    Mine is close as far as what it needs for me to be comfortable to take it to the pits but a while away in time. My priority is getting my Dakar bike complete, in the crate and on it's way to Buenos Aires in the next couple of weeks. The I can start playing with the 101. So I might be similar timing to yourself and Stuee.

  4. #64
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,616
    Total Downloaded
    0
    Mine is the same as yours and I am thinking of taking mine off and putting something wider on. Not sure of the laws but I think the entire tyre has to be covered not just the tread - if it is just the tread then that is great.

    Irrespective of the - like mine, the pic of the rear shows that the tread is not covered by the mudflaps and rear bodywork. I will be using some rubber at the ends of the rear cross member to cover the tread at leas and moving the mudflaps across as well.

    With mine - I get worried when I part it somewhere as you have found the vehicle attracts a lot of attention and sometimes the cops and while they are normally OK I am waiting for the defect notice on the mudflaps not covering the rear tread.

    Garry
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

  5. #65
    Join Date
    Oct 2010
    Location
    Perth
    Posts
    1,191
    Total Downloaded
    0
    Another weekend and another wheel arch flare done - drivers side rear this time. At this rate ...

  6. #66
    Join Date
    Oct 2010
    Location
    Perth
    Posts
    1,191
    Total Downloaded
    0
    Some irony for the evening: The entry list for the 2015 Dakar Rally has been released and I'm number ... wait for it ... 101
    I figure with me on my KTM #101 there'll be nothing we can't get around, through or over!
    45 days to go!

    Oh, and I fitted another wheel arch flare - this time the drivers side front, so only the passengers side front left to do. Pic's soon.

  7. #67
    Join Date
    Sep 2008
    Location
    smurf village
    Posts
    8,332
    Total Downloaded
    0

  8. #68
    Join Date
    Oct 2010
    Location
    Perth
    Posts
    1,191
    Total Downloaded
    0
    Got the last of the four wheel arch flares done, so I celebrated by putting the 101 to work for the day!
    Out on the fire break on my block, it gets a bit "squeezy" in a few places so I've been doing a little bit of trimming:


    Okay, maybe you could call it a fair bit of trimming:


    Got 3 good loads out and the firey's should be able to get through without losing too many heads now. Of course the downside is that my "fire-pile" is a bit high:



    It was a great day to be out in the 101 though, even if only pottering around my 5 acres. Got to love that V8 exhaust note and sheer "grunt"!
    I can't wait to get it licensed but that's going to wait until I get back from the Dakar now, so February sometime.

  9. #69
    Join Date
    Oct 2010
    Location
    Perth
    Posts
    1,191
    Total Downloaded
    0
    Not really a 101 post but I got my wheels back from Stuee the other day so put the 101 to work again today. Well ... not really working, just carting the pruning saws and some water for me, but it's more fun than driving the tractor and makes a nice background for the piccies. Got a fair few waves from people driving past too!

    It was my birthday earlier in the week, and Western Power, the power supply company that operates the power lines between my boundaries and the roads, were very thoughtful and tied some nice pink ribbons on my boundary fence on my birthday - 8 of them! Unfortunately it means I have 8 trees that need to be trimmed to maintain the power line clearance areas. So I grabbed my pruning tools and the 101 and set out.

    Now you see it ...:




    ... now you don't:




    Now I just have some "slicing and dicing" to do.


    I suspect my idea of "trimming" might differ from Western Power - or at least from the local council. The tree stepped out as 16m - the tallest tree I've dropped so far! It couldn't have gone any better, falling exactly where I planned (as opposed to over the fence and through the power lines and onto the road!). I can't drop the next one with a pink ribbon against it the same way because of the Dampier to Bunbury Natural Gas Pipeline easement. Mightn't be too good to rupture that!

  10. #70
    Join Date
    Oct 2011
    Location
    Fremantle WA
    Posts
    3,838
    Total Downloaded
    0
    So does this mean plenty of firewood for next winter, and is the idea of a working bee to help fund Dakar still on? (I'm still getting through the last lot of wood)
    D4 MY16 TDV6 - Cambo towing magic, Traxide Batteries, X Lifter, GAP ID Tool, Snorkel, Mitch Hitch, Clearview Mirrors, F&R Dashcams, CB
    RRC MY95 LSE Vogue Softdash "Bessie" with MY99 TD5 and 4HP24 transplants
    SADLY SOLD MY04 D2a TD5 auto and MY10 D4 2.7 both with lots of goodies

Page 7 of 19 FirstFirst ... 5678917 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!