Thread: Puma Glove Box?

G'day Dullbird,

Not the case, I fitted mine the other day and it does not interfere at all.
I am pleased with mine, but more inportantly so is my better half

Originally Posted by jake

G'day Dullbird,

Not the case, I fitted mine the other day and it does not interfere at all.
I am pleased with mine, but more inportantly so is my better half

rrrrrrrrrrr Yes I see.

Mmmmmmmmmmmmmmm

Blast didn't turn up this week

Oh well at least the extra Croytec bits did

Hi there.
How does the lid stay closed on the glove box....velcro?
I used the old style kitchen cupboard latches.

Velcro is used just to cushion the hole where the pins go in, you could also use A thick foam. It was something I had handy at the time. Only purpose is to stop any rattles should they occur. Gloves box is big enough to fit sat phone pluse portable UHF and other small items

Well it arrived on Wednesday but didn't get around to installing it until today. Took about 20 minutes and about 2 litres of water, it is bloody hot outside even at 5pm

The lid stays closed thanks to the two locating poles that slot in either side of the plastic cover. You remove the metal clips from these.

I've added a couple of rubber tabs to help stop any rattle. Pic's to follow.

Here is another option. Might get a picture of the 'handle' version tomorrow.

20101112-no handle.jpg

It's a straight replacement for the standard top cover and grab handle, using the same screw/bolt fittings. A five minute job at most.

Material: Moulded and folded ABS, bead blasted to give it the same matt finish as the standard interior.

Concealed push-to-close grabber latches pull and hold the lids securely closed.

Cheers,
Daniel

Originally Posted by Mulgo

Here is another option. Might get a picture with the 'handle' version tomorrow. It's a straight replacement for the standard top cover and grab handle, using the same screw/bolt fittings. A five minute job at most.

I like!

Where can we get the one with the grab handle?