does the central locking work when you unlock it from the drivers door?
 TD5 Double Cab Central Locking Question
 TD5 Double Cab Central Locking Question
		Guys,
One of my rear doors has stopped locking / unlocking with the keyfob.
The mechanism feels fine when I push the lock button down and pull it up again.
When I run the central locking tests in the 10AS module (Faultmate MSV2) I can hear the servo in the door working and it sounds like the sound the other 3 doors make under the same test.
Any ideas before I start to strip the door down?
Thx
Jon
Regards,
Jon
does the central locking work when you unlock it from the drivers door?
Good question! I dont know.
I'll have a try when I get home tonight and let you know.
If it does, does that narrow down the possible cause?
Thx
J
Regards,
Jon
I have the same problem on my Defender , Rear driver side door.
Took the trim off & everything worked fine, so I suspect the mechanisim fouls with the trim, bent / adjusted/ lubed with graphite. Put trim back on & same problem. Use Graphite , not WD40 as WD40 etc attracts dust & worsens the problem.
There are dints around the door handle where it looks like the prev owner has been thumping it to get it to work.
Be sure & get yourself a set of spare door trim studs ($6.00 ebay) you will need them.
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks