does the central locking work when you unlock it from the drivers door?
Guys,
One of my rear doors has stopped locking / unlocking with the keyfob.
The mechanism feels fine when I push the lock button down and pull it up again.
When I run the central locking tests in the 10AS module (Faultmate MSV2) I can hear the servo in the door working and it sounds like the sound the other 3 doors make under the same test.
Any ideas before I start to strip the door down?
Thx
Jon
Regards,
Jon
does the central locking work when you unlock it from the drivers door?
Good question! I dont know.
I'll have a try when I get home tonight and let you know.
If it does, does that narrow down the possible cause?
Thx
J
Regards,
Jon
I have the same problem on my Defender , Rear driver side door.
Took the trim off & everything worked fine, so I suspect the mechanisim fouls with the trim, bent / adjusted/ lubed with graphite. Put trim back on & same problem. Use Graphite , not WD40 as WD40 etc attracts dust & worsens the problem.
There are dints around the door handle where it looks like the prev owner has been thumping it to get it to work.
Be sure & get yourself a set of spare door trim studs ($6.00 ebay) you will need them.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks