Thread: Vibration in my butt with Tom Wood's shaft :)

Ok so today I fitted the Terrafirma adjustable panhard rod to the fender. It easy job, took about 40min including adjusting the steering wheel.

The axel was 22mm out of center towards the driver’s side. Once I corrected that the it shifted the bottom uni and shaft to more of an aligned position.i suspect this was the culprit I was looking for .

I took it for a squirt and hey presto the vibration is virtually gone, more than expectable. After I returned I spun up a new 20mm spaces for the rear coils in replacement for the 10mm one I had installed earlier, I took it out for another spin and now it’s as smooth as silk.

Woohoo ! im a happy little vegimite

Next I intend to buy some front dislocation cones rear cranked rear radial arms and a full bush kit then fab up an offset front swaybar spacer, down 22mm and back 10mm .

After that Il stop messing with the suspension and start to fit it up for camping and playing.

Originally Posted by Drover

Good news, you must be relieved.

**** yeah it was doing my head in ..

Thanks for your help