Page 1 of 3 123 LastLast
Results 1 to 10 of 25

Thread: td5 head shuffle

  1. 29th November 2012, 08:02 PM #1
    rangietragic's Avatar
    rangietragic
    rangietragic is offline Master
    Join Date
    Mar 2009
    Location
    maryborough qld
    Posts
    723
    Total Downloaded
    0

    td5 head shuffle

    Looks like my 130 has got the dreaded head shuffle.Temp guage shoots up into the red and top hose gets hard.Can i use metallic seal up till i get it fixed or am i wasting my time?Mate used it on his nissan patrol 2.8 and it held for a while.Dont need this just before xmas!
    Reply With Quote Reply With Quote
  2. 30th November 2012, 12:18 AM #2
    Benz's Avatar
    Benz
    Benz is offline Master
    Join Date
    Feb 2011
    Location
    Traveling Aus
    Posts
    639
    Total Downloaded
    0
    costs more $$$ if the head warps/cracks.

    I would be doing it right the first time.
    Reply With Quote Reply With Quote
  3. 30th November 2012, 11:39 AM #3
    Graeme
    Graeme is online now Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    The head can move far enough for valves to damage the bore.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
  4. 30th November 2012, 12:23 PM #4
    rangietragic's Avatar
    rangietragic
    rangietragic is offline Master
    Join Date
    Mar 2009
    Location
    maryborough qld
    Posts
    723
    Total Downloaded
    0
    Quote Originally Posted by Graeme View Post
    The head can move far enough for valves to damage the bore.
    Yeah, gone cold on using seal up, even temporaraly.Wait for my tax cheque and get it done properly.Estimates so far $1800 to$3500 if head not damaged,from three land rover repairers.
    Reply With Quote Reply With Quote
  5. 30th November 2012, 02:31 PM #5
    Sparkys Guest
    What is the dreaded head shuffle?
    Reply With Quote Reply With Quote
  6. 30th November 2012, 02:59 PM #6
    gazk's Avatar
    gazk
    gazk is offline Master
    Join Date
    Dec 2007
    Location
    Cambewarra, NSW
    Posts
    517
    Total Downloaded
    0
    Head movement due to expansion/contraction of the alloy head that partially shears off the two plastic locating dowels - normally leads to pressurisation of the cooling system. Fix Requires (as a minimum) a new head gasket, new head bolts and new steel locating dowels.
    Reply With Quote Reply With Quote
  7. 30th November 2012, 05:19 PM #7
    Sparkys Guest
    Thanks Gaz, is that only on the TD5?
    Reply With Quote Reply With Quote
  8. 30th November 2012, 07:42 PM #8
    nedflanders's Avatar
    nedflanders
    nedflanders is offline Master
    Join Date
    Jan 2012
    Location
    Now in Sunny Perth
    Posts
    443
    Total Downloaded
    0
    Bollox, never heard of this before, now something else to worry about, as far as the Landie goes I'm a bloody hypercondriac
    Reply With Quote Reply With Quote
  9. 30th November 2012, 07:48 PM #9
    rangietragic's Avatar
    rangietragic
    rangietragic is offline Master
    Join Date
    Mar 2009
    Location
    maryborough qld
    Posts
    723
    Total Downloaded
    0
    Quote Originally Posted by nedflanders View Post
    Bollox, never heard of this before, now something else to worry about, as far as the Landie goes I'm a bloody hypercondriac
    Its a chance you take when you own an early td5 ,defender or disco.My luck ran out but will fix it and keep it for many years yet.Luv it.
    Reply With Quote Reply With Quote
  10. 30th November 2012, 07:57 PM #10
    Graeme
    Graeme is online now Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    Quote Originally Posted by gazk View Post
    Fix Requires .....and new steel locating dowels.
    The steel dowels from later models can't be used on the earliest heads so I made my own for my '99 using the shank of an 8mm drill bit. My Oct 2002 MY03 D2a still had plastic (there's a VIN cut-off) but could have used the steel dowels from the later MY03s.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
Page 1 of 3 123 LastLast
« Central Door Lock Actuator Replacement Part | Losing all my fillings »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!