-
19th May 2013, 05:09 PM
#1
EGR Solenoid
At last my Defender runs like clockwork. As part of the process to resolve issues I installed an EGR blanking kit and disconnected the middle vacuum hose from the EGR solenoid. I then put a blanking cap over that connection on the solenoid so that it is sealed.
Ran fine for a week or two but has now started making a large vibrating noise like a buzzer. If I disconnect the top hose (the vacuum supply) the noise stops. Am I right in assuming the solenoid is cactus and needs replacing or has this something to do with the EGR blanking kit?
Thanks in advance
Howard
-
20th May 2013, 09:52 PM
#2
Hi Howard,
I'm not sure if I have misunderstood the instructions, I've just fitted the EGR blanking kit and all I left connected to the EGR solenoid was the two wires. I disconnected all the tubing and fitted a cap on the tubing connection to the brake servo vacuum line. Mine seems to work fine. Not sure if this helps or not.
-
21st May 2013, 07:25 PM
#3
Yeah, pretty obvious now that you say it. Just did the same and the issue has gone away - thanks.
Howard
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks