Thread: HID driving lights on LE Exped roof rack

Just checked VicRoads site and there is a section under drving lights but no mention of where and how you install them

Originally Posted by ProjectDirector

Just checked VicRoads site and there is a section under drving lights but no mention of where and how you install them

I tried there too, but Vic Roads site was not very helpful, half the links didn't work anyway.

Here's the document I was referring to, it's a Qld document not Victorian but I would have thought ADR's are for the whole country though the states might implement them a little differently.

http://www.cviaq.com.au/PDFs/VSI%20H...ng%20Lamps.pdf

Here's the important bit

.......................TMR is placing a twelve month moratorium on the active enforcement of the requirement that vehicles fitted with LED light bar type driving light(s) should have those lights fitted in pairs, pending consideration of changes to ADR13/00.


The original article I read (somewhere) stated that the blanking strip allowed in Qld was not allowed in Victoria.

Deano

Originally Posted by DeanoH

I tried there too, but Vic Roads site was not very helpful, half the links didn't work anyway.

Here's the document I was referring to, it's a Qld document not Victorian but I would have thought ADR's are for the whole country though the states might implement them a little differently.

http://www.cviaq.com.au/PDFs/VSI%20H...ng%20Lamps.pdf

Here's the important bit

.......................TMR is placing a twelve month moratorium on the active enforcement of the requirement that vehicles fitted with LED light bar type driving light(s) should have those lights fitted in pairs, pending consideration of changes to ADR13/00.


The original article I read (somewhere) stated that the blanking strip allowed in Qld was not allowed in Victoria.

Deano

I have a friend that works at TJM and told me it is for QLD but he suspects it may flow down to Vic

There are also these, which i am using.

80W LED Spot Lights Pair | eBay

Guys does anyone know what the amp rating is on the current defenders alternator ? Mine is 2013. Just need to make sure it can handle the new lights given the bars are 120-180w and including my current halogen driving lights at 100w

Is it 150 amps?

TDCi are 150amp

Originally Posted by Tombie

TDCi are 150amp

Is that current model?