Reply With Quotehi steve-thanks for the reply- by cut-outs facing forward do you mean as in pic 2 or 3?
TopicToaster
SubscriberCan't recall for sure which way round they go, but if I had to guess I'd say cut outs forward. in my case on the 130 I had to refit them or the new pads squealed badly.
Steve
1985 County - Isuzu 4bd1 with HX30W turbo, LT95, 255/85-16 KM2's
1988 120 with rust and potential
1999 300tdi 130 single cab - "stock as bro"
2003 D2a Td5 - the boss's daily drive
Master
Supporterhi steve-thanks for the reply- by cut-outs facing forward do you mean as in pic 2 or 3?
TopicToaster
SubscriberPic 2 is for RH outer and LH inner padsOriginally Posted by mattmac
Pic 3 is for LH outer and RH inner.
Steve
1985 County - Isuzu 4bd1 with HX30W turbo, LT95, 255/85-16 KM2's
1988 120 with rust and potential
1999 300tdi 130 single cab - "stock as bro"
2003 D2a Td5 - the boss's daily drive
Master
SupporterHi Steve- i added pic 2 or 3 to illustrate which way around the metal shim went on the same pad - does the cutout part sit over the exposed section of brake pad or over the part that already has the attached backing plate on it- Pic 2 is over the existing backing plate and pic 3 is over exposed section-hope that makes sense?
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks