3.2 Up and running!!!

**grinna1965** · 21st February 2018, 10:57 AM

Originally Posted by Baytown

Hi Grinner.
Do you have HP and torque figures available for your 3.2 conversion now that it’s been in the Defender for a while and hopefully dialled in?
Can this engine easily be chipped/reflashed to increase the output accordingly?
Finally, what would be the rough build time please Grinna.
I only have the one vehicle now so just want to start looking at options re getting around during the engine/transmission swap, deciding between the 3.2 vs LS3, vs buying an Disco 4 SDV6 as a dedicated tow vehicle etc.
Thanks for any information mate.

Ken

our dyno is a 2wd but the figures will be fairly close.A 2.2 with a remap and bigger intercooler at the wheels is approx 110hp & 345nm these figgers are compareable to a bas 170hp tune so it lets you know how much power your loosing between the flywheel and wheels
our 3.2 at the moment is 192hp & 500nm at the wheels.as you can see its 75%increase in hp & 45% increase in torque
a ford ranger std at the wheels is 145hp & 350nm and after remap is 170hp and 440nm
the is no chip or flash tune,it is a stand alone ecu that we custom tune here

**uninformed** · 21st February 2018, 09:10 PM

I like it....

I dont think the rover diffs, axles, cvs and cheapen'd centre diff will lol.

Keep up the good work

**cripesamighty** · 21st February 2018, 10:02 PM

I really like those power figures. One powerball.....

**D90 orkney** · 21st February 2018, 10:19 PM

Is there a ball park figure for this engine conversion?

**grinna1965** · 22nd February 2018, 05:01 AM

Originally Posted by D90 orkney

Is there a ball park figure for this engine conversion?

Yes there is give me a call as there are different packages (02 65853200)cheers

**Tins** · 22nd February 2018, 01:04 PM

Originally Posted by grinna1965

Yes there is give me a call as there are different packages (02 65853200)cheers

Very friendly and helpful you are, too.

**Baytown** · 22nd February 2018, 06:39 PM

I spoke to Grinna today re the conversion. Nice, helpful fella.
It sounds very promising and just what I’m after. I might get away with minimal running gear changes as I have HD hubs, and ARB Air locker diff centres.
‘I forgot to ask about exhaust system changes, but most of the engine plumbing retains standard Defender 2.2 hoses which is great re servicing etc.
I just need my house to sell so I can sort the logistics out. Does anyone want to buy a 2.2 engine and maybe gear box with 140,000kms on it?😉
Best wishes all.

Ken

**Tins** · 22nd February 2018, 06:54 PM

Originally Posted by Baytown

‘I forgot to ask about exhaust system changes, but most of the engine plumbing retains standard Defender 2.2 hoses which is great re servicing etc.

I spoke to Glenn today as well. Seems like it is all covered. He sources manifolds from the US, other bits from elsewhere. It really sounds like a well thought through conversion. Not simply a case of bolt it in and drive it out. I reckon the price is quite reasonable, especially given the volume of work. There won't be a whole lot of them. I love the idea. Especially in a 130.

**uninformed** · 22nd February 2018, 07:42 PM

The 3.2 is a great engine (so far for me) but imo definitely needs a lt230 behind it. I think any LR owner will love it as long as the install is sorted and trouble free

**uninformed** · 22nd February 2018, 07:44 PM

Btw 120 nm loss on the dyno seems a lot to me or is this normal?

Thread: 3.2 Up and running!!!

Thread Tools

hp & torque

Price

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions