Thread: Where to obtain door seals / rubbers for Defender 130?

Originally Posted by MLD

I fitted these to a MY10. I assume they would work on pre MY07 but can't be sure. they are a league above the factory issue for MY10.

Britcar (UK) Ltd


Part numbers are:


1 x LR029307, WEATHERSTRIP - DOOR - LOWER (2nd Row)


1 x LR029308, WEATHERSTRIP - DOOR - LOWER (2nd Row)


2 x LR029309, WEATHERSTRIP - DOOR - LOWER (Front Doors)

Your Search Results >

There are 3 different brands with the same part number - Genuine, Britpart and Bearmach.
Do you know which you got?

Don't really remember sorry as I got the lower seal a long time ago.. I can say I am generally pretty reluctant to buy anything from one of those brands and its not the most expensive one!

Just a note when fitting them. Take care when drilling out the rivets on the bottom of the door. You need to use the correct size drill bit. I think form memory you need two different size bits as all the push fit clips on the seal are not all the same. Its awkward to get the drill in to do some of the holes but it is possible without removing the door. On one hole I think I let the drill wander a bit and the hole was ever so slightly oversize. This was enough so the clip would not stay attached. Noting that could not be fixed with a bit of glue though.

I think somebody did a good post about how to fit them with drill sizes etc a few years ago.