Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: The new LROV90

  1. #11
    Join Date
    Jan 1970
    Location
    Geelong
    Posts
    59
    Total Downloaded
    0
    The springs I have been using are OME 755 in the back and 764 in the front. The recommended 767 in the front are too hard I think.

    I have use QT front radius arms but I think you could easily get away with SuperPro castor bushes.

    The rear arms I bent myself with a pipe bender and then welded angle iron down them oto strengthen them.

    You could just put a double cardon joint on the original shaft, however I already had one made just needs to be a little longer and I can keep the other one as a spare. I used a D2 tranfer flange and when machined a spigot (light grey bit) to position a more standard spicer DC joint, rather than use a D2 one that you cannot get repair kits for.

    Also managed to get a driving light switch of LR for $18 that fits nicely on the dash.

    6.JPG

    7.JPG

    8.JPG

    9.JPG

    10.JPG

  2. #12
    Join Date
    Feb 2008
    Location
    Sandstone Point Qld
    Posts
    634
    Total Downloaded
    0
    Thanks for the reply and info mate Just another Question who make these QT arms?

  3. #13
    p38arover's Avatar
    p38arover is offline Major part of the heart and soul of AULRO.com
    Administrator
    I'm here to help you!
    Gold Subscriber
    Join Date
    Jan 1970
    Location
    Western Sydney
    Posts
    30,704
    Total Downloaded
    1.63 MB
    Quote Originally Posted by MacFamily View Post
    Thanks for the reply and info mate Just another Question who make these QT arms?
    QT?

    Radius Arms from Qt Services

    Radius Arms - Defender 90 / 110 from Qt Services
    Ron B.
    VK2OTC

    2003 L322 Range Rover Vogue 4.4 V8 Auto
    2007 Yamaha XJR1300
    Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA



    RIP Bucko - Riding on Forever

  4. #14
    Join Date
    Feb 2008
    Location
    Sandstone Point Qld
    Posts
    634
    Total Downloaded
    0

  5. #15
    Join Date
    Jan 1970
    Location
    Geelong
    Posts
    59
    Total Downloaded
    0
    Fitted an Airtec snorkel today - not overly impressed with the setup and hope for others sake that safari comes up with something better.

    Also fitted my ex Td5 uprated intercooler so I can confirm that it has exactly the same mounts as on the Td5.

    11.jpg

    12.JPG

  6. #16
    Join Date
    Sep 2007
    Location
    Gold Coast
    Posts
    6,078
    Total Downloaded
    0
    Nice 110.

    Just one thing to note is the QT radius arms don't have best reputation.....

    A big hit will just bend a standard one.... not so with the QT ones - I have seen a few reports of broken ones

    Cheers
    Pete

  7. #17
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    2,382
    Total Downloaded
    0
    Thats very pretty, makes me wanna go out and polish mine...NOT

    My type of car wash



Page 2 of 2 FirstFirst 12

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!