RRC 1990 ls1, t400 & LT230 conversion

Quote:

---

Originally Posted by AK_AMG

Well most of the dash is now out as well as most of the wiring. All the wiring is actually quite basic once you break it down.

I really need to start to get some pics up on here.

---

Ls looms are easy, 4 relays a few fuses to interface it and all good

Use photobucket for your pics, nice and easy - best part is its free

Need pics!

Pics to come soon.

OK nearly finished the relay/fuse board which will run the whole car. Had a bit of a snag with the transfer conversion kit. The front shaft hits the T400 sump so a bit of trimming is required there. LS1 is being dropped off this weekend.

Oh and another snag is we ended up chucking out the transfer shifter bracket that the lever bolts to but a mate is wrecking a car which we will be looking at tonight.

I have come to a bit of a snag and as my post above, i am in need of the LT230 lower shifter mount.

See this wanted add.
http://www.aulro.com/afvb/wanted-adv...t-housing.html

Any help would be great.

Found one.

Ok guys the Mark4x4 adapters were a fail. We now need to make our own.

cal415 did you have much experience with this? Do others have any pointers to look out for for mounting the engine in the bay?

PICs time finally.

Motor coming out of its old home:
https://www.aulro.com/afvb/images/im...12/05/1427.jpg
Turbo 400 given a fresh paint job, transfer case adaptor in the middle, mated to a disco 1 transfer case, kindly donate
https://www.aulro.com/afvb/images/im...12/05/1428.jpg
Cleaned up the motor, new gaskets etc
https://www.aulro.com/afvb/images/im...12/05/1429.jpg
Deeper pan (has some funky cooling tubes running thru it). I expect this to cop a fair hiding so oil temps are a concern.
https://www.aulro.com/afvb/images/im...12/05/1430.jpg
Rangie has now been fairly extensively stripped.
https://www.aulro.com/afvb/images/im...12/05/1431.jpg
Wiring board to run the whole car, i.e everything is getting turfed and rerun.
https://www.aulro.com/afvb/images/im...12/06/1018.jpg
https://www.aulro.com/afvb/images/im...12/06/1019.jpg

There are more pics to come. We made new engine mounts and the drive train is now in.

oopps double post

Watching with interest. Wiring looks most crafty!