Thread: Vacuum advance broke off

If you really think you need it , here is a new one.

Land Rover Discovery V8 Vacuum Advance Unit Free Workshop Manual CD | eBay

second hand will be just as old as yours and a complete dissy SH may also have a stuffed vac unit.AS bee utey said just make sure the points / pickup plate doesn't move and check if the rotor can spring forward in direction and then spring back to rest this is the mechanical advance. they nearly never get lubed in service and can stick solid.

Originally Posted by disco dan

There was a difference when it was on. It's on gas also and ran fine on gas. Now I have got it running on fuel again as injectors where screwed

Is it running worse because of the petrol or the timing ?

Ok some it ran fine on gas but didn't run at all on fuel so I put in refurbed injectors and cleaned the fuel rail ect. Started it up and it was good idled and sounded good but I thought it sounded a bit advanced. So when I checked the dizzy I broke the vacuum advance off. I tried it after that without blocking the hole in pelenium and it was rough and wouldn't idle. I haven't tried starting it while blocking the hole.

Ok so I remounted the vacuum advance and to remount the arm I had to take off the plastic cover and rotor when I pulled the rotor it felt like it pulled the centre out further then normal as once I put it all back together the cap wouldn't sit properly. What do I do ??

Originally Posted by disco dan

Ok so I remounted the vacuum advance and to remount the arm I had to take off the plastic cover and rotor when I pulled the rotor it felt like it pulled the centre out further then normal as once I put it all back together the cap wouldn't sit properly. What do I do ??

You pulled too hard on the rotor button, you then have to Fix It.

Lucas V8 dissy nylon clip repair method.