Thread: Perentie Springs

That works out about right

front measures 28.5 cm

rears 33cm

looking at going with an Aussie Ryder setup

The Ultimate Suspension : Custom Built Suspension for all Vehicles

with RFR-13HD front springs (mine has a winch so needs the extra LBA capacity)


I'm just tossing up what springs to put on the back.
Standard or matching HD with the front.

I wouldn't mind a softer ride on the rear and I'm never going to load it to the hilt or tow too much, but I wonder if that will give it a strange ride having some pretty stiff springs in the front and softer ones in the back.

Originally Posted by Chris078

That works out about right

front measures 28.5 cm

rears 33cm

looking at going with an Aussie Ryder setup

The Ultimate Suspension : Custom Built Suspension for all Vehicles

with RFR-13HD front springs (mine has a winch so needs the extra LBA capacity)


I'm just tossing up what springs to put on the back.
Standard or matching HD with the front.

I wouldn't mind a softer ride on the rear and I'm never going to load it to the hilt or tow too much, but I wonder if that will give it a strange ride having some pretty stiff springs in the front and softer ones in the back.

Those are some sagged springs mate! Mine measure 300mm and 350mm.

I stand by my earlier post in this thread

huh. and I thought it was a PITA to get in and out of now, let alone another cm higher.

The setup I'm going with is supposed to be 30-50mm up from the stock 110 height. Hopefully that should be about what it is now. I really don't want it any higher.

what did you end up putting in yours?