-
7th May 2010, 08:36 PM
#1
Electric door mirror strip down
Hi all,
Has anyone ever pulled apart an electric door mirror from a Disco1?
This is for an MY95.
Mine jitter when you adjust them so I assume they need more lube.
I've already pulled the switch apart and cleaned it up so it isn't that. Although it did improve the stop/start movement they used to have.
Thanks
-
8th May 2010, 01:33 PM
#2
My RRC mirrors jitter when they get to the limit of their travel.
Do they jitter in both directions? If in only one direction maybe a click different on the mirror housing will be needed.
The LH mirror has to be further back than the RH in my car anyway.
Regards Philip A
-
9th May 2010, 03:08 PM
#3
my disco 1 mirrors have to be in different click positions on each side if its any help.
-
10th May 2010, 06:19 PM
#4
Yes my LHS mirror needs to be clicked out a bit further too but the mirrors jitter in all directions.
I have been having a look around and noticed you can buy new glass bits for them so you must be able to get them apart but I haven't seen how yet. Don't really want to smash mine trying. Maybe I should try it at a wrecker first
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks